Hi,
i am getting the following error messages when i am working on openocd with em starter kit.
please provide me solution.
Open On-Chip Debugger 0.9.0-dev-ga3f9fb5 (2015-12-25-21:13)
Licensed under GNU GPL v2
For bug reports, read
debug_level: 0
adapter speed: 10000 kHz
Error: JTAG tap: arc-em.cpu expected 1 of 1: 0x200044b1 (mfg: 0x258, part: 0x0004, ver: 0x2)
Error: Trying to use configured scan chain anyway...
Error: arc-em.cpu: IR capture error; saw 0x03 not 0x01
Error: isa_config.addr_size value 8 is invalid.
Error: JTAG tap: arc-em.cpu expected 1 of 1: 0x200044b1 (mfg: 0x258, part: 0x0004, ver: 0x2)
Error: Trying to use configured scan chain anyway...
Error: arc-em.cpu: IR capture error; saw 0x03 not 0x01
target state: halted
Error: Unable to set 16bit breakpoint at address 0x00020194 - check that memory is read/writable
Error: Unable to set 16bit breakpoint at address 0x00020194 - check that memory is read/writable
REGARDS
SREENU KOTHAPALLI
Sr.Embedded Engineer
MANJEERA DIGITAL SYSTEMS PVT. LTD.
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
