This is an automated email from Gerrit. Guido Günther (a...@sigxcpu.org) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/4646
-- gerrit commit c8a4139e6fac53b971c97c5175171082ae176495 Author: Guido Günther <a...@sigxcpu.org> Date: Thu Aug 9 17:11:43 2018 +0200 tcl/board: Add Emcraft imx8 SOM BSB support Tested with Olimex ARM-USB-TINY-H adapter Simple commands work fine but there are currently issues when attaching remote gdb or running virt2phys: https://sourceforge.net/p/openocd/tickets/201/ Change-Id: I86ccf1d93c5d23870bb522f92b3e2af190d529e8 Signed-off-by: Guido Günther <a...@sigxcpu.org> diff --git a/tcl/board/emcraft_imx8m-som-bsb.cfg b/tcl/board/emcraft_imx8m-som-bsb.cfg new file mode 100644 index 0000000..f912f7e --- /dev/null +++ b/tcl/board/emcraft_imx8m-som-bsb.cfg @@ -0,0 +1,22 @@ +# +# configuration file for NXP MC-IMX8M-EVK +# + +# only JTAG supported +transport select jtag + +# set a safe JTAG clock speed, can be overridden +adapter_khz 1000 + +# SRST and TRST are wired up +reset_config trst_and_srst + +# delay after SRST goes inactive +adapter_nsrst_delay 70 + +# board has an i.MX8MQ with 4 Cortex-A53 cores +set CHIPNAME imx8mq +set CHIPCORES 4 + +# source SoC configuration +source [find target/imx8m.cfg] -- ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel