Hi,
We are using custom SoC design where the CORTEX M0+ cores are connected to the
DAPLITE via APB2AHB Bridge. We are able to access ROM tables via APB but we are
unable to access M0+ via APB as the JTAG debuggers (we have an Olimex
ARM-USB-OCD-H) by default search for M0+ in AHB bus only. Kindly, advise any
technique or methods to connect to M0+ core via APB in the setup mentioned. The
JTAG architecture diagram is attached.
Regards
Sandeep Babu
Ignitarium Technologies Pvt Ltd.
---
** [tickets:#193] Accessing CORTEX-M0+ via APB**
**Status:** new
**Milestone:** 0.9.0
**Created:** Fri Jul 13, 2018 05:17 AM UTC by SANDEEP BABU
**Last Updated:** Fri Jul 13, 2018 05:24 AM UTC
**Owner:** nobody
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
