This is an automated email from Gerrit. Antonio Borneo ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/4702
-- gerrit commit 0f6d8e394e50f162994c11294d826eaf027484c0 Author: Antonio Borneo <[email protected]> Date: Sun Sep 23 09:53:30 2018 +0200 stlink: add usb pid for v2.1 without mass storage device New version of ST-Link/V2.1 without mass storage device. From debug point of view, it is compatible with existing ST-Link/V2.1 It uses a new USB PID because the USB endpoints and interfaces are different from usual ST-Link/V2.1 Add the new PID in the driver, in the tcl interface script and in the udev configuration script. Change-Id: Id2e1b5a5d0347c5d951a86a9cdb76be52cfd4ea3 Signed-off-by: Antonio Borneo <[email protected]> diff --git a/contrib/60-openocd.rules b/contrib/60-openocd.rules index 692e1b1..9d18e36 100644 --- a/contrib/60-openocd.rules +++ b/contrib/60-openocd.rules @@ -63,6 +63,7 @@ ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3748", MODE="660", GROUP="plugdev", # STLink v2-1 ATTRS{idVendor}=="0483", ATTRS{idProduct}=="374b", MODE="660", GROUP="plugdev", TAG+="uaccess" +ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3752", MODE="660", GROUP="plugdev", TAG+="uaccess" # Cypress KitProg in KitProg mode ATTRS{idVendor}=="04b4", ATTRS{idProduct}=="f139", MODE="660", GROUP="plugdev", TAG+="uaccess" diff --git a/src/jtag/drivers/stlink_usb.c b/src/jtag/drivers/stlink_usb.c index d9ca53e..6e6ad1b 100644 --- a/src/jtag/drivers/stlink_usb.c +++ b/src/jtag/drivers/stlink_usb.c @@ -63,6 +63,7 @@ #define STLINK_V1_PID (0x3744) #define STLINK_V2_PID (0x3748) #define STLINK_V2_1_PID (0x374B) +#define STLINK_V2_1_NO_MSD_PID (0x3752) /* the current implementation of the stlink limits * 8bit read/writes to max 64 bytes. */ @@ -2063,6 +2064,7 @@ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd) h->trace_ep = STLINK_TRACE_EP; break; case STLINK_V2_1_PID: + case STLINK_V2_1_NO_MSD_PID: h->version.stlink = 2; h->tx_ep = STLINK_V2_1_TX_EP; h->trace_ep = STLINK_V2_1_TRACE_EP; diff --git a/tcl/interface/stlink.cfg b/tcl/interface/stlink.cfg index d747d85..f7f70c8 100644 --- a/tcl/interface/stlink.cfg +++ b/tcl/interface/stlink.cfg @@ -6,7 +6,7 @@ interface hla hla_layout stlink hla_device_desc "ST-LINK" -hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b +hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x3752 # Optionally specify the serial number of ST-LINK/V2 usb device. ST-LINK/V2 # devices seem to have serial numbers with unreadable characters. ST-LINK/V2 -- _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
