Hi, Silly question. Can we get 7b03129916aa050f4d120a532659dbbba279f7be rolled back temporarily?
> commit 7b03129916aa050f4d120a532659dbbba279f7be > Author: Edward Fewell <efew...@ti.com> > Date: Thu Jan 18 20:48:11 2018 -0600 > > flash/nor: Add support for TI CC26xx/CC13xx flash > > Added cc26xx flash driver to support the TI CC26xx and CC13xx > microcontrollers. Driver is capable of determining which MCU > is connected and configures itself accordingly. Added config > files for four specific variants: CC26x0, CC13x0, CC26x2, and > CC13x2. > > Note that the flash loader code is based on the sources used > to support flash in Code Composer Studio and Uniflash from TI. > > Removed cc26xx.cfg file made obsolete by this patch. > > Change-Id: Ie2b0f74f8af7517a9184704b839677d1c9787862 > Signed-off-by: Edward Fewell <efew...@ti.com> > Reviewed-on: http://openocd.zylin.com/4358 > Tested-by: jenkins > Reviewed-by: Tomas Vanek <van...@fbl.cz> > Reviewed-by: Fredrik Hederstierna <fred...@hederstierna.com> The newer code might be the best thing since sliced bread (and may even allow me to rid myself of TI Uniflash), but until *everything* that needs it is updated (i.e. `grep -RF target/cc26xx.cfg openocd/tcl` returns back empty), 'cc26xx.cfg' should stay. Unfortunately rolling back to the older OpenOCD 0.10.0 release breaks support for the nrf52840 (the `program` command just fails). At the moment, cc2538.cfg is now broken and unusable: > $ openocd -f vrt/projects/widesky/hub/openocd.cfg > Open On-Chip Debugger 0.10.0+dev-00577-gea410488-dirty (2018-11-16-17:23) > Licensed under GNU GPL v2 > For bug reports, read > http://openocd.org/doc/doxygen/bugs.html > > Info : to use this adapter you MUST add ``init; ftdi_set_signal PWR_RST 1; > jtag arp_init'' to the end of your config file! > > /usr/bin/../share/openocd/scripts/target/cc2538.cfg:16: Error: Can't find > target/cc26xx.cfg > in procedure 'script' > at file "embedded:startup.tcl", line 60 > at file "vrt/projects/widesky/hub/openocd.cfg", line 3 > at file "/usr/bin/../share/openocd/scripts/target/cc2538.cfg", line 16 Rolling back this one patch however (which I did by hand; just extracted the deleted file out of the patch and re-instated it in my `/usr/share/openocd/scripts/target` directory) fixed the problem and I can now debug the CC2538 again. Regards, -- Stuart Longland (aka Redhatter, VK4MSL) I haven't lost my mind... ...it's backed up on a tape somewhere. _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
