- **status**: new --> closed
---
** [tickets:#105] openocd.cfg confusion**
**Status:** closed
**Milestone:** 0.9.0
**Created:** Fri Aug 21, 2015 12:51 PM UTC by PEdro
**Last Updated:** Tue Nov 03, 2015 07:50 AM UTC
**Owner:** nobody
Hi everyone , i am really sorry to post this here , but it looks that in forum
of openocd i have to wait from administration approoval .
This is the first time i am using openocd , and i know that i need to configure
an openocd.cfg file to avoid this message :
Open On-Chip Debugger 0.10.0-dev-00022-g2dcf7bf-dirty (2015-08-15-20:27)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
embedded:startup.tcl:60: Error: Can't find openocd.cfg
in procedure 'script'
at file "embedded:startup.tcl", line 60
Error: Debug Adapter has to be specified, see "interface" command
embedded:startup.tcl:60: Error:
in procedure 'script'
at file "embedded:startup.tcl", line 60
But i didnt not found yet on the net or even on openocd help , where is the
place i should put that file!!!!
I tryed on the root of the program , on the src folder , and still have this
error .
I am on linux and i am using an :
Bus 003 Device 002: ID 0403:6010 Future Technology Devices International, Ltd
FT2232C Dual USB-UART/FIFO IC
Could some gentle soul here give me an help on this ?
There is much lack of configuration setup information on the help about this
issue .
And if we go on the net , then we will find websites pointing configurations to
old drivers that are not already in openocd .
As last resort , i try this site to try to fix this issue , but as always ,
they did not explain where to put that config file .
http://www.fun-tech.se/stm32/OpenOCD/index.php
Again , sorry for posting this here , i know that for some of you should be a
piece of cake , but for me is a dead end .
Thank you for your understanding .
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list._______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
