---
** [tickets:#215] Add Xilinx XVC support to OpenOCD**
**Status:** new
**Milestone:** 0.9.0
**Created:** Mon Dec 10, 2018 08:35 AM UTC by Alex Forencich
**Last Updated:** Mon Dec 10, 2018 08:35 AM UTC
**Owner:** nobody
Xilinx Virtual Cable (XVC) is a simple TCP protocol supported by the Xilinx
FPGA development tools (Xilinx ISE and Xilinx Vivado) for controlling remote
JTAG cables. Adding support for XVC to OpenOCD would mean that any JTAG cable
that OpenOCD supports could be used by the Xilinx tools via XVC, enabling not
only configuration of FPGAs but also debugging via Xilinx chipscope, IBERT,
vio, etc.
Xilinx XVC page: https://www.xilinx.com/products/intellectual-property/xvc.html
Github page: https://github.com/Xilinx/XilinxVirtualCable
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
