---
** [tickets:#225] Error: The 'jtag configure' command must be used after
'init'.**
**Status:** new
**Milestone:** 0.9.0
**Created:** Wed Feb 06, 2019 08:19 PM UTC by Bill Paul
**Last Updated:** Wed Feb 06, 2019 08:19 PM UTC
**Owner:** nobody
Checking out the most recent sources from git, many configuration scripts which
used to work now yield the following error instead:
openocd -f interface/ftdi/olimex-arm-usb-ocd-h.cfg -f target/imx6.cfg
Open On-Chip Debugger 0.10.0+dev-00677-gdeaf3d26-dirty (2019-02-06-11:35)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "jtag". To override use
'transport select <transport>'.
Warn : imx6.sdma: nonstandard IR value
Error: The 'jtag configure' command must be used after 'init'.
openocd -f board/avnet_ultrazed-eg.cfg
Open On-Chip Debugger 0.10.0+dev-00677-gdeaf3d26-dirty (2019-02-06-11:35)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
none separate
none separate
adapter speed: 1000 kHz
Error: The 'jtag configure' command must be used after 'init'.
This appears to have been caused by the commit:
https://repo.or.cz/openocd.git/commit/877cec20dca6e78f9f029f0f173879cda101a6c2
I'm not sure what the correct fix would be. This does not happen with every
script. (It seemed to work ok with board/nordic_nrf52_dk.cfg). I don't know if
the scripts need to be updated or if the code does.
I worked around it my modifying src/jtag/tcl.c to change the mode for the jtag
configure command to COMMAND_ANY (currently it's COMMAND_EXEC):
openocd -f interface/ftdi/olimex-arm-usb-ocd-h.cfg -f target/imx6.cfg
Open On-Chip Debugger 0.10.0+dev-00677-gdeaf3d26-dirty (2019-02-06-12:14)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "jtag". To override use
'transport select <transport>'.
Warn : imx6.sdma: nonstandard IR value
adapter speed: 1000 kHz
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : clock speed 1000 kHz
Info : JTAG tap: imx6.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.),
part: 0xba00, ver: 0x4)
Info : TAP imx6.sdma does not have IDCODE
Info : JTAG tap: imx6.sjc tap/device found: 0x2191c01d (mfg: 0x00e (Freescale
(Motorola)), part: 0x191c, ver: 0x2)
Info : imx6.cpu.0: hardware has 6 breakpoints, 4 watchpoints
Info : Listening on port 3333 for gdb connections
My host environment is FreeBSD/amd64 11.1-RELEASE, however I observed the same
problem building on an Ubuntu Linux host (16.04). The above test case is with a
Freescale/NXP Sabre SD i.MX6Q target.
(Apologies if this has already been noticed and is being discussed elsewhere.)
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list._______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
