Thanks for all these hints, I'll try to provide you more information during this weekend Ciao, RM
On Fri, Apr 5, 2019 at 11:56 AM Matthias Welwarsky < [email protected]> wrote: > On Freitag, 5. April 2019 10:53:54 CEST Rocco Marco Guglielmi wrote: > > > I thought I was clear. Let me point out some statements > > > > > > - The code is loaded in 0x0800 0000 (LMA) and executed at 0x0020 0000 > > > (VMA) in line with Freddie suggestion > > > - The flash procedure works as expected (even after error, on target > > > reset the code is executed properly) > > > - On a previous version of openocd (Open On-Chip Debugger > > > 0.10.0+dev-00226-g1c2e3d41d) we noticed no problem with the same > > > identical code > > > - The issue seems related to the inability of OpenOCD to place a > > > breakpoint in the VMA. > > > > > > To me, it sounds like a regression but I cannot be sure. > > > > You can help debugging this by doing a "git bisect" with 1c2e3d41d as the > last known-good revision. This commit is really quite old, though. It's > from December 16th, 2017. You need to be able to compile openocd from > source and run the test for each bisect step. > > > > BR, > > Matthias > > > > > Ciao, > > > RM > > > > > > > > > On Fri, Apr 5, 2019 at 10:13 AM <[email protected] > > > > > > > > wrote: > > > > Rocco Marco Guglielmi writes: > > > > > Hello there, > > > > > any hint? > > > > > Ciao, > > > > > RM > > > > > > > > Get you linker script right! > > > > It is the task of the linker command to flash at 0x08000000 and to run > > > > at the other address. > > > > > > > > Bye > > > > -- > > > > Uwe Bonnes [email protected] > > > > > > > > Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt > > > > --------- Tel. 06151 1623569 ------- Fax. 06151 1623305 --------- > > > > > > -- > > Mit freundlichen Grüßen/Best regards, > > > > Matthias Welwarsky > > Project Engineer > > > > SYSGO AG > > Office Mainz > > Am Pfaffenstein 14 / D-55270 Klein-Winternheim / Germany > > Phone: +49-6136-9948-0 / Fax: +49-6136-9948-10 > > VoIP: SIP:[email protected] > > E-mail: [email protected] / Web: http://www.sysgo.com > > _________________________________________________________________________________ > Web: https://www.sysgo.com > > Blog: https://www.sysgo.com/blog > > Events: https://www.sysgo.com/events > > Newsletter: https://www.sysgo.com/newsletter > _________________________________________________________________________________ > Handelsregister/Commercial Registry: HRB Mainz 90 HRB 8066 > > Vorstand/Executive Board: Etienne Butery (CEO), Kai Sablotny (COO) > > Aufsichtsratsvorsitzender/Supervisory Board Chairman: Marc Darmon > > USt-Id-Nr./VAT-Id-No.: DE 149062328 >
_______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
