Hi Paul, We wanted to run OpenOCD with in our process preferably by linking it
as a DLL. Is this something possible?
---
** [tickets:#235] Communicating with OpenOCD's north bound API's?**
**Status:** new
**Milestone:** 0.9.0
**Created:** Wed May 01, 2019 09:12 PM UTC by Tim Smith
**Last Updated:** Wed May 01, 2019 09:12 PM UTC
**Owner:** nobody
Hi,
We have a debugger that supports halt() , step() and go() high level run
control commands. We wanted to add ARM run control support utilizing OpenOCD.
Wondering if OpenOCD has north bound API's or pinch points for our C++ debugger
API to wire into, to make the same halt, go and step commands to work
seemlessly with ARM processor via OpenOCD?
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
