This is an automated email from Gerrit. Antonio Borneo ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/5287
-- gerrit commit fc70cead87c7f64815abb1da472d60e4a7fcce65 Author: Antonio Borneo <[email protected]> Date: Wed Aug 14 14:53:24 2019 +0200 tcl: update scripts after "jtag_reset" got deprecated Avoid annoying "deprecated" messages in the scripts distributed with OpenOCD code. Change-Id: I82d27cd420db30f0653efbd286a627ef56a8c1fd Signed-off-by: Antonio Borneo <[email protected]> diff --git a/tcl/board/openrd.cfg b/tcl/board/openrd.cfg index db3cb03..7659b07 100644 --- a/tcl/board/openrd.cfg +++ b/tcl/board/openrd.cfg @@ -25,10 +25,10 @@ proc openrd_init { } { # possible that initial tap examination failed. So let's # re-examine the target again here when nSRST is asserted which # should then succeed. - jtag_reset 0 1 + adapter assert srst feroceon.cpu arp_examine halt 0 - jtag_reset 0 0 + adapter deassert srst wait_halt arm mcr 15 0 0 1 0 0x00052078 diff --git a/tcl/board/renesas_gen2_common.cfg b/tcl/board/renesas_gen2_common.cfg index 00fa777..3e4579b 100644 --- a/tcl/board/renesas_gen2_common.cfg +++ b/tcl/board/renesas_gen2_common.cfg @@ -4,10 +4,10 @@ reset_config trst_and_srst srst_nogate proc init_reset {mode} { # Assert both resets: equivalent to a power-on reset - jtag_reset 1 1 + adapter assert trst assert srst # Deassert TRST to begin TAP communication - jtag_reset 0 1 + adapter deassert trst assert srst # TAP should now be responsive, validate the scan-chain jtag arp_init diff --git a/tcl/board/renesas_salvator-xs.cfg b/tcl/board/renesas_salvator-xs.cfg index 1558a52..e6f4da3 100644 --- a/tcl/board/renesas_salvator-xs.cfg +++ b/tcl/board/renesas_salvator-xs.cfg @@ -12,10 +12,10 @@ reset_config trst_and_srst srst_nogate proc init_reset {mode} { # Assert both resets: equivalent to a power-on reset - jtag_reset 1 1 + adapter assert trst assert srst # Deassert TRST to begin TAP communication - jtag_reset 0 1 + adapter deassert trst assert srst # TAP should now be responsive, validate the scan-chain jtag arp_init diff --git a/tcl/board/sheevaplug.cfg b/tcl/board/sheevaplug.cfg index ff333ca..0d21be3 100644 --- a/tcl/board/sheevaplug.cfg +++ b/tcl/board/sheevaplug.cfg @@ -25,10 +25,10 @@ proc sheevaplug_init { } { # possible that initial tap examination failed. So let's # re-examine the target again here when nSRST is asserted which # should then succeed. - jtag_reset 0 1 + adapter assert srst feroceon.cpu arp_examine halt 0 - jtag_reset 0 0 + adapter deassert srst wait_halt arm mcr 15 0 0 1 0 0x00052078 diff --git a/tcl/target/pxa255.cfg b/tcl/target/pxa255.cfg index 3862425..4b222de 100644 --- a/tcl/target/pxa255.cfg +++ b/tcl/target/pxa255.cfg @@ -38,11 +38,11 @@ reset_config trst_and_srst separate srst_nogate # reset processing that works with PXA proc init_reset {mode} { # assert both resets; equivalent to power-on reset - jtag_reset 1 1 + adapter assert trst assert srst # drop TRST after at least 32 cycles sleep 1 - jtag_reset 0 1 + adapter deassert trst assert srst # minimum 32 TCK cycles to wake up the controller runtest 50 @@ -51,7 +51,7 @@ proc init_reset {mode} { jtag arp_init # ... and take it out of reset - jtag_reset 0 0 + adapter deassert trst deassert srst } proc jtag_init {} { diff --git a/tcl/test/syntax1.cfg b/tcl/test/syntax1.cfg index 79d5384..5d013f0 100644 --- a/tcl/test/syntax1.cfg +++ b/tcl/test/syntax1.cfg @@ -5,8 +5,8 @@ jtag_ntrst_delay 200 reset_config trst_and_srst srst_pulls_trst #LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough -jtag_reset 1 1 -jtag_reset 0 0 +adapter assert trst assert srst +adapter deassert trst deassert srst #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) -- _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
