This is an automated email from Gerrit. Antonio Borneo ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/5754
-- gerrit commit 2e2f8d1a8d77f2e8d8165621fdd2583f93591223 Author: Antonio Borneo <[email protected]> Date: Sat Jul 4 19:38:00 2020 +0200 doc: remove duplicated words Remove occurrences of duplicated words in the documentation. Change-Id: Ib6ef1607fc5e6387764be108b2b9c0c93ac10a62 Signed-off-by: Antonio Borneo <[email protected]> diff --git a/README b/README index 2ff0329..fe70e72 100644 --- a/README +++ b/README @@ -288,7 +288,7 @@ Parallel Port Dongles --------------------- If you want to access the parallel port using the PPDEV interface you -have to specify both --enable-parport AND --enable-parport-ppdev, since the +have to specify both --enable-parport AND --enable-parport-ppdev, since the later option is an option to the parport driver. The same is true for the --enable-parport-giveio option, you have to diff --git a/doc/manual/release.txt b/doc/manual/release.txt index 44de446..d1a6c62 100644 --- a/doc/manual/release.txt +++ b/doc/manual/release.txt @@ -82,7 +82,7 @@ number will be zero (<code>z = 0</code>). For a <i>major releases</i>, the minor version will @a also be zero (<code>y = 0, z = 0</code>). After these required numeric components, release version strings -may contain tags such as as <em>-rc1</em> or <em>-rc2</em>. +may contain tags such as <em>-rc1</em> or <em>-rc2</em>. These 'rc' tags indicate "release candidate" versions of the package. Like major/minor/micro numbers, these are updated as part of the release process. diff --git a/doc/manual/server.txt b/doc/manual/server.txt index 50fcac7..8041c3d 100644 --- a/doc/manual/server.txt +++ b/doc/manual/server.txt @@ -23,7 +23,7 @@ In early 2008, Oyvind Harboe and Duane Ellis had talked about how to create a reasonable GUI for OpenOCD - something that is non-invasive, simple to use and maintain, and does not tie OpenOCD to many other packages. It would be wrong to "spider web" requirements into other -external external packages. That makes it difficult for developers to +external packages. That makes it difficult for developers to write new code and creates a support nightmare. In many ways, people had talked about the need for some type of @@ -67,7 +67,7 @@ write scripts internally to help things, or we can write "C" code that interfaces well with TCL. From there, the developers wanted to create an external front-end that -would be @a very usable and that that @a any language could utilize, +would be @a very usable and that @a any language could utilize, allowing simple front-ends to be (a) cross-platform (b) language agnostic, and (c) easy to develop and use. diff --git a/doc/manual/style.txt b/doc/manual/style.txt index e654be9..7191a4b 100644 --- a/doc/manual/style.txt +++ b/doc/manual/style.txt @@ -52,7 +52,7 @@ OpenOCD project. -# remove it entirely (git can retrieve the old version), or -# use an @c \#if/\#endif block. -Finally, try to avoid lines of code that are longer than than 72-80 columns: +Finally, try to avoid lines of code that are longer than 72-80 columns: - long lines frequently indicate other style problems: - insufficient use of static functions, macros, or temporary variables diff --git a/doc/openocd.texi b/doc/openocd.texi index a0ce7e3..47a352d 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -1020,7 +1020,7 @@ will help support users of any board using that chip. @end quotation @item -You may may need to write some C code. +You may need to write some C code. It may be as simple as supporting a new FT2232 or parport based adapter; a bit more involved, like a NAND or NOR flash controller driver; or a big piece of work like supporting @@ -5661,7 +5661,7 @@ at91samd bootloader 16384 @deffn Command {at91samd dsu_reset_deassert} This command releases internal reset held by DSU and prepares reset vector catch in case of reset halt. -Command is used internally in event event reset-deassert-post. +Command is used internally in event reset-deassert-post. @end deffn @deffn Command {at91samd nvmuserrow} @@ -5768,7 +5768,7 @@ The AT91SAM4L driver adds some additional commands: @deffn Command {at91sam4l smap_reset_deassert} This command releases internal reset held by SMAP and prepares reset vector catch in case of reset halt. -Command is used internally in event event reset-deassert-post. +Command is used internally in event reset-deassert-post. @end deffn @end deffn @@ -5809,7 +5809,7 @@ processor to be halted. @deffn Command {atsame5 dsu_reset_deassert} This command releases internal reset held by DSU and prepares reset vector catch in case of reset halt. -Command is used internally in event event reset-deassert-post. +Command is used internally in event reset-deassert-post. @end deffn @deffn Command {atsame5 userpage} @@ -8392,7 +8392,7 @@ and any buffered trace data is invalidated. @itemize @item @var{type} ... describing how data accesses are traced, -when they pass any ViewData filtering that that was set up. +when they pass any ViewData filtering that was set up. The value is one of @option{none} (save nothing), @option{data} (save data), @@ -8740,7 +8740,7 @@ and any other core-specific commands that may be available. @deffn Command {arm7_9 dbgrq} [@option{enable}|@option{disable}] Displays the value of the flag controlling use of the -the EmbeddedIce DBGRQ signal to force entry into debug mode, +EmbeddedIce DBGRQ signal to force entry into debug mode, instead of breakpoints. If a boolean parameter is provided, first assigns that flag. -- _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
