- **status**: new --> closed
- **discussion**: enabled --> disabled
- **Resolution**: --> notabug
- **Comment**:
The bug tracking system is not meant for end-user support. Please read the
official User Manual and if you still have any questions reach through the
support channels.
---
** [tickets:#274] openocd error stmlink with stm32l053r8**
**Status:** closed
**Milestone:** 0.9.0
**Labels:** stm32lx flash OpenOCD ST-LINK NRST signal
**Created:** Thu Jul 09, 2020 09:04 AM UTC by MURLIDHAR ROY
**Last Updated:** Thu Jul 09, 2020 12:36 PM UTC
**Owner:** OpenOCD-Gerrit
Hi team,
I am working in windows 10 system.
Following these instructions from starting
"https://docs.rust-embedded.org/discovery/03-setup/windows.html";.
hardware/board- STM32L053R8 (Nucleo64)
When I tried this command->"openocd -s C:\OpenOCD\share\scripts -f
interface/stlink.cfg -f target/stm32l0x.cfg" it gives following error-
**xPack OpenOCD, x86_64 Open On-Chip Debugger 0.10.0+dev-00378-ge5be992df
(2020-06-26-09:29)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
embedded:startup.tcl:26: Error: Can't find target/stm32l0x.cfg
in procedure 'script'
at file "embedded:startup.tcl", line 26**
kindly suggest to me the solution.
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list._______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
