Main OpenOCD is quite a long way behind the riscv-openocd fork. Please try that
version, and if the problem exists there, then file a bug on github.
riscv-openocd lives at https://github.com/riscv/riscv-openocd
Tim
---
** [tickets:#276] riscv reg command problem**
**Status:** new
**Milestone:** 0.9.0
**Created:** Sat Aug 08, 2020 03:39 PM UTC by Peter
**Last Updated:** Sat Aug 08, 2020 03:39 PM UTC
**Owner:** nobody
Hi
I am using longan riscv board, after "reset halt", my pc register has value
0x8000000, when i type "reg", no value comes out, i need to "reg pc", then
"reg" to display the correct value. There are no command to "force" read all
registers too, it only has "reg pc force". If reading register one by one, it
would be too slow. Any work around?
Thanks
Peter
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list._______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
