On Mon, Aug 17, 2020 at 03:58:59AM -0000, Eddie Garcia wrote:
> I downloaded your patch and applied it. Is it not possible to use the "load"
> command from GDB? I can use the built-in OpenOCD commands to program the
> external flash, but the "load" command from GDB seems to fail all the time.
It should be possible unless you disable GDB memory map. Please
confirm you're not doing that, and show an openocd debug log. Feel
free to /join the IRC channel for a more interactive discussion.
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:[email protected]
---
** [tickets:#208] Open OCD for external qspi programming and debugging**
**Status:** closed
**Milestone:** 0.9.0
**Labels:** QSPI Flash
**Created:** Sat Sep 29, 2018 08:58 PM UTC by Praveen
**Last Updated:** Mon Aug 17, 2020 03:58 AM UTC
**Owner:** nobody
Hi,
We want to use Open OCD + GDB to program and debug from external quad NAND
flash for STM32H7xx micrcontroller. Till now we have been using internal flash.
Please share any reference documents or sample projects to develop the scripts
or drivers to acheive our debug environment.
Thanks,
Praveen
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
