This is an automated email from Gerrit.
Yasushi SHOJI (ya...@spacecubics.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/6040
-- gerrit
commit 3b76d090d3c841636353baa5e312df8da74f3afe
Author: Yasushi SHOJI <ya...@spacecubics.com>
Date: Thu Jan 28 23:27:37 2021 +0900
doc: Fix type in Hooking up the JTAG Adapter
We are talking about adapter connectivity in this chapter. It should
be "dongles" instead of "cables".
Change-Id: I7bd4307765517375caa2af86dfc929d0ef66c3e6
Signed-off-by: Yasushi SHOJI <ya...@spacecubics.com>
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 2658c75..4b31cbd 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -834,7 +834,7 @@ using Eclipse or some other GUI.
Today's most common case is a dongle with a JTAG cable on one side
(such as a ribbon cable with a 10-pin or 20-pin IDC connector)
and a USB cable on the other.
-Instead of USB, some cables use Ethernet;
+Instead of USB, some dongles use Ethernet;
older ones may use a PC parallel port, or even a serial port.
@enumerate
--
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
