From: Rene Kita <[email protected]>
---
This removes some warnings which prevent a successful build with -Werror
which is enabled by default. I'm using gcc 11, so maybe others are not
getting this warnings yet.
In src/flash/nor/numicro.c the debug messages were misleadingly indented.
In src/target/arm920t.c the array size where smaller than expected from
the receiving function.
If this patch is not up to par for the openocd project consider it a bug
report.
src/flash/nor/numicro.c | 6 +++---
src/target/arm920t.c | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/src/flash/nor/numicro.c b/src/flash/nor/numicro.c
index 7609fa81c..1971daa24 100644
--- a/src/flash/nor/numicro.c
+++ b/src/flash/nor/numicro.c
@@ -1243,7 +1243,7 @@ static uint32_t numicro_fmc_cmd(struct target *target,
uint32_t cmd, uint32_t ad
retval = target_read_u32(target, NUMICRO_FLASH_ISPTRG, &status);
if (retval != ERROR_OK)
return retval;
- LOG_DEBUG("status: 0x%" PRIx32 "", status);
+ LOG_DEBUG("status: 0x%" PRIx32 "", status);
if ((status & (ISPTRG_ISPGO)) == 0)
break;
if (timeout-- <= 0) {
@@ -1512,7 +1512,7 @@ static int numicro_erase(struct flash_bank *bank,
unsigned int first,
retval = target_read_u32(target, NUMICRO_FLASH_ISPTRG,
&status);
if (retval != ERROR_OK)
return retval;
- LOG_DEBUG("status: 0x%" PRIx32 "", status);
+ LOG_DEBUG("status: 0x%" PRIx32 "", status);
if (status == 0)
break;
if (timeout-- <= 0) {
@@ -1601,7 +1601,7 @@ static int numicro_write(struct flash_bank *bank, const
uint8_t *buffer,
retval = target_read_u32(target,
NUMICRO_FLASH_ISPTRG, &status);
if (retval != ERROR_OK)
return retval;
- LOG_DEBUG("status: 0x%" PRIx32 "",
status);
+ LOG_DEBUG("status: 0x%" PRIx32 "", status);
if (status == 0)
break;
if (timeout-- <= 0) {
diff --git a/src/target/arm920t.c b/src/target/arm920t.c
index c96975a77..6809492d7 100644
--- a/src/target/arm920t.c
+++ b/src/target/arm920t.c
@@ -245,8 +245,8 @@ static int arm920t_read_cp15_interpreted(struct target
*target,
uint32_t cp15_opcode, uint32_t address, uint32_t *value)
{
struct arm *arm = target_to_arm(target);
- uint32_t *regs_p[1];
- uint32_t regs[2];
+ uint32_t *regs_p[16];
+ uint32_t regs[16];
uint32_t cp15c15 = 0x0;
struct reg *r = arm->core_cache->reg_list;
@@ -295,7 +295,7 @@ int arm920t_write_cp15_interpreted(struct target *target,
{
uint32_t cp15c15 = 0x0;
struct arm *arm = target_to_arm(target);
- uint32_t regs[2];
+ uint32_t regs[16];
struct reg *r = arm->core_cache->reg_list;
/* load value, address into R0, R1 */
--
2.31.0.rc2
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
