Nice job! Congrats to all! On Mon, Mar 8, 2021 at 1:35 PM Tim Newsome <[email protected]> wrote:
> Congrats on getting this out, Paul! I appreciate you taking on the most > thankless task of all: making a release. > > Tim > > On Sun, Mar 7, 2021 at 10:46 AM Paul Fertser <[email protected]> wrote: > >> Finally! Final. >> >> I'm happy to announce the availability of OpenOCD version 0.11.0. >> >> So four years since the last release and probably three years overdue >> it's here. Chances are we'll be able to produce them more often thanks >> to the expansion of the core team by several amazingly productive >> members. Please see the commit statistics at the end of this mail, and >> do not forget that also plenty of effort is going into reviewing and >> testing patches. >> >> Despite the seemingly large number of committers the project would >> still benefit from getting more help, so if you can review patches, >> improve documentation, provide support on the mailing lists and IRC or >> participate by other means please do not be too shy to stand up :) >> >> We expect this release to be picked up by the distro maintainers >> pretty soon, the release candidate testing was quite encouraging in >> this regard. If you're a distro maintainer and have any issues, please >> report and we'll try to help with sorting everything out. >> >> >> The list of the most essential changes follows: >> >> JTAG Layer: >> * add debug level 4 for verbose I/O debug >> * bitbang, add read buffer to improve performance >> * Cadence SystemVerilog Direct Programming Interface (DPI) >> adapter driver >> * CMSIS-DAP v2 (USB bulk based) adapter driver >> * Cypress KitProg adapter driver >> * FTDI FT232R sync bitbang adapter driver >> * Linux GPIOD bitbang adapter driver through libgpiod >> * Mellanox rshim USB or PCIe adapter driver >> * Nuvoton Nu-Link and Nu-Link2 adapter drivers >> * NXP IMX GPIO mmap based adapter driver >> * ST-Link consolidate all versions in single config >> * ST-Link read properly old USB serial numbers >> * STLink/V3 support (for ST devices only !) >> * STM8 SWIM transport >> * TI XDS110 adapter driver >> * Xilinx XVC/PCIe adapter driver >> >> Target Layer: >> * 64 bit address support >> * ARCv2 target support >> * ARM Cortex-A hypervisor mode support >> * ARM Cortex-M fast PC sampling support for profiling >> * ARM generic CTI support >> * ARM generic mem-ap target support >> * ARMv7-A MMU tools >> * ARMv7m traces add TCP stream server >> * ARMv8 AARCH64 target support and semihosting support >> * ARMv8 AARCH64 disassembler support through capstone library >> * ARMv8-M target support >> * EnSilica eSi-RISC target support, including instruction tracing >> eSi-Trace support >> * MIPS64 target support >> * Motorola SREC S6 record image file support >> * RISC-V target support >> * SEGGER Real Time Transfer (RTT) initial support (for single >> target, >> Cortex-M only) >> * ST STM8 target support >> * Various MIPS32 target improvements >> >> Flash Layer: >> * Atheros (ath79) SPI interface support >> * Atmel atmega128rfa1 support >> * Atmel SAM D21, D51, DA1, E51, E53, E54, G55, R30 support >> * Atmel SAMC2?N* support >> * Cypress PSoC5LP, PSoC6 support >> * EnSilica eSi-RISC support >> * Foshan Synwit Tech SWM050 support >> * Maxim Integrated MAX32XXX support >> * Nordic Semiconductor nRF51822, nRF52810, nRF52832 support >> * NXP Kinetis K27, K28, KE1x, KEAx, KL28, KL8x, KV5x, KWx support >> * Renesas RPC HF support >> * SH QSPI support >> * SiFive Freedom E support >> * Silicon Labs EFR-family, EZR32HG support >> * ST BlueNRG support >> * ST STM32 QUAD/OCTO-SPI interface support for Flash, FRAM and >> EEPROM >> * ST STM32F72x, STM32F4x3, STM32H7xx support >> * ST STM32G0xx, STM32G4xx, STM32L4x, STM32WB, STM32WL support >> * ST STM32L5x support (non secure mode) >> * TI CC13xx, CC26xx, CC32xx support >> * TI MSP432 support >> * Winner Micro w600 support >> * Xilinx XCF platform support >> * Various discrete SPI NOR flashes support >> >> Board, Target, and Interface Configuration Scripts: >> * 8devices LIMA board config >> * Achilles Instant-Development Kit Arria 10 board config >> * Amazon Kindle 2 and DX board config >> * Analog Devices ADSP-SC58x, ADSP-SC584-EZBRD board config >> * Andes Technology ADP-XC7KFF676 board config >> * Andes Technology Corvette-F1 board config >> * ARM Musca A board config >> * Arty Spartan 7 FPGA board config >> * Atmel SAMD10 Xplained mini board config >> * Atmel SAMD11 Xplained Pro board config >> * Atmel SAM G55 Xplained Pro board config >> * AVNET UltraZED EG StarterKit board config >> * Blue Pill STM32F103C8 board config >> * DP Busblaster v4.1a board config >> * DPTechnics DPT-Board-v1 board config >> * Emcraft imx8 SOM BSB board config >> * Globalscale ESPRESSObin board config >> * Kasli board config >> * Kintex Ultrascale XCKU040 board config >> * Knovative KC-100 board config >> * LeMaker HiKey board config >> * Microchip (Atmel) SAME54 Xplained Pro board config >> * Microchip (Atmel) SAML11 Xplained Pro board config >> * Nordic module NRF52 board config >> * Numato Lab Mimas A7 board config >> * NXP Freedom FRDM-LS1012A board config >> * NXP IMX7SABRE board config >> * NXP IMX8MP-EVK board config >> * NXP MC-IMX8M-EVK board config >> * QuickLogic QuickFeather board config >> * Renesas R-Car E2, H2, M2 board config >> * Renesas R-Car Salvator-X(S) board config >> * Renesas RZ/A1H GR-Peach board config >> * Rigado BMD-300 board config >> * Sayma AMC board config >> * Sifive e31arty, e51arty, hifive1 board config >> * ST B-L475E-IOT01A board config >> * ST BlueNRG idb007v1, idb008v1, idb011v1 board config >> * ST STM32F412g discovery board config >> * ST STM32F413h discovery board config >> * ST STM32F469i discovery board config >> * ST STM32F7 Nucleo board config >> * ST STM32F723e discovery board config >> * ST STM32F746g discovery board config >> * ST STM32F769i discovery board config >> * ST STM32H735g discovery board config >> * ST STM32H743zi Nucleo board config >> * ST STM32H745i discovery board config >> * ST STM32H747i discovery board config >> * ST STM32H750b discovery board config >> * ST STM32H7b3i discovery board config >> * ST STM32H7x_dual_qspi board config >> * ST STM32H7x3i Eval boards config >> * ST STM32L073 Nucleo board config >> * ST STM32L476g discovery board config >> * ST STM32L496g discovery board config >> * ST STM32L4p5g discovery board config >> * ST STM32L4r9i discovery board config >> * ST STM32L5 Nucleo board config >> * ST STM32MP15x DK2 board config >> * ST STM32WB Nucleo board config >> * ST STM8L152R8 Nucleo board config >> * Synopsys DesignWare ARC EM board config >> * Synopsys DesignWare ARC HSDK board config >> * TI BeagleBone family boards config >> * TI CC13xx, CC26xx, CC32xx LaunchPad board config >> * TI MSP432 LaunchPad board config >> * Tocoding Poplar board config >> * TP-Link WDR4300 board config >> * Allwinner V3s target config >> * Andes Technology NDS V5 target config >> * Atmel atmega128rfa1 target config >> * ARM corelink SSE-200 target config >> * Atheros_ar9344 target config >> * Cypress PSoC5LP, PSoC6 target config >> * EnSilica eSi-RISC target config >> * Foshan Synwit Tech SWM050 target config >> * GigaDevice GD32VF103 target config >> * Hisilicon Hi3798 target config >> * Hisilicon Hi6220 target config >> * Infineon TLE987x target config >> * Marvell Armada 3700 target config >> * Maxim Integrated MAX32XXX target config >> * Mellanox BlueField target config >> * Microchip (Atmel) SAME5x, SAML1x target config >> * NXP IMX6SX, IMX6UL, IMX7, IMX7ULP, IMX8 target config >> * NXP Kinetis KE1xZ, KE1xF target config >> * NXP LPC84x, LPC8Nxx, LS1012A, NHS31xx target config >> * Qualcomm QCA4531 target config >> * QuickLogic EOS S3 target config >> * Renesas R-Car E2, H2, M2 target config >> * Renesas R-Car Gen3 target config >> * Renesas RZ/A1H target config >> * Rockchip RK3308 target config >> * ST BlueNRG target config >> * ST STM32G0, STM32G4, STM32H7, STM32L0, STM32L5 target config >> * ST STM32MP15x target config >> * ST STM32WBx, STM32WLEx target config >> * ST STM8L152, S003, S103, S105 target config >> * Synopsys DesignWare ARC EM target config >> * Synopsys DesignWare ARC HS Development Kit SoC target config >> * TI CC13xx, CC26xx, CC32xx target config >> * TI TNETC4401 target config >> * Xilinx UltraScale+ target config >> * Altera 5M570Z (MAXV family) CPLD config >> * Xilinx Ultrascale, XCF CPLD config >> * Intel (Altera) Arria10 FPGA config >> * Cadence SystemVerilog Direct Programming Interface (DPI) >> interface config >> * Cypress KitProg interface config >> * Digilent SMT2 NC interface config >> * DLN-2 example of Linux GPIOD interface config >> * FTDI C232HM interface config >> * HIE JTAG Debugger interface config >> * In-Circuit's ICprog interface config >> * isodebug isolated JTAG/SWD+UART interface config >> * Mellanox rshim USB or PCIe interface config >> * Nuvoton Nu-Link interface config >> * NXP IMX GPIO mmap based interface config >> * Steppenprobe open hardware interface config >> * TI XDS110 interface config >> >> Server Layer: >> * 64 bit address support >> * default bind to IPv4 localhost >> * gdb: allow multiple connections >> * gdb: architecture element support >> * gdb: vCont, vRun support >> * telnet: handle Ctrl+A, Ctrl+E and Ctrl+K >> >> RTOS: >> * Chromium-EC rtos support >> * hwthread pseudo rtos support >> * NuttX rtos support >> * RIOT rtos support >> >> Documentation: >> * Improve STM32 flash driver >> * Various typo fix and improvements >> >> Build and Release: >> * Add libutil to support jimtcl version 0.80 >> * Clang warning fixes >> * GitHub workflow for Win32 snapshot binaries >> * Handle Tcl return values consistently >> * Mitigation for CVE-2018-5704: Prevent some forms of Cross >> Protocol Scripting attacks >> * Support for libftdi 1.5 >> * Travis-CI basic support >> * Update libjaylink to version 0.2.0 >> * Update jimtcl to version 0.79 >> * Use external (optional) library capstone for ARM and AARCH64 >> disassembly >> >> >> This release also contains a number of other important functional and >> cosmetic bugfixes. For more details about what has changed since the >> last release, see the git repository history: >> >> http://sourceforge.net/p/openocd/code/ci/v0.11.0/log/?path= >> >> >> Hooray for the developers! >> >> 392 Antonio Borneo >> 189 Tomas Vanek >> 135 Marc Schink >> 120 Matthias Welwarsky >> 85 Paul Fertser >> 74 Tarek BOCHKATI >> 47 Christopher Head >> 31 Marek Vasut >> 28 Oleksij Rempel >> 21 Tim Newsome >> 20 Edward Fewell >> 17 Salvador Arroyo >> 15 Andreas Fritiofson >> 15 Steven Stallion >> 14 Karl Palsson >> 14 Leonard Crestez >> 13 Evgeniy Didin >> 11 Jiri Kastner >> 10 Bohdan Tymkiv >> 10 Robert Jordens >> 9 Omair Javaid >> 8 Ake Rehnman >> 8 Moritz Fischer >> 7 Andreas Färber >> 7 David Ung >> 7 Florian Fainelli >> 6 Andreas Bolsch >> 6 Felipe Balbi >> 6 Jan Matyas >> 5 Hellosun Wu >> 5 Jonathan McDowell >> 4 Cody P Schafer >> 4 Jonas Norling >> 4 Laurent LEMELE >> 4 Liviu Ionescu >> 4 Peter Mamonov >> 4 Spencer Oliver >> 3 Alistair Francis >> 3 Armin van der Togt >> 3 Aurélien Martin >> 3 Diego Herranz >> 3 Dominik Peklo >> 3 Girts >> 3 Jan Kowalewski >> 3 Jean-Christian de Rivaz >> 3 Kevin Gillespie >> 3 Kevin Yang >> 3 Liming Sun >> 3 Mete Balci >> 3 Peter Lawrence >> 3 Slowcoder >> 3 Yasushi SHOJI >> 2 Adam Bass >> 2 Adrian Negreanu >> 2 Alexandre Torgue >> 2 Alexandru Gagniuc >> 2 Bas Vermeulen >> 2 Cody Schafer >> 2 Darius Rad >> 2 Forest Crossman >> 2 Freddie Chopin >> 2 Girts Folkmanis >> 2 Guido Günther >> 2 Jerome Forissier >> 2 Joakim Nohlgård >> 2 John Pham >> 2 Juha Niskanen >> 2 Kai Geissdoerfer >> 2 Kevin Burke >> 2 Khem Raj >> 2 Lars Poeschel >> 2 Michele Sardo >> 2 Mikhail Rasputin >> 2 Mirko Vogt >> 2 Piotr Kasprzyk >> 2 R. Diez >> 2 Seth LaForge >> 2 William D. Jones >> 2 luca vinci >> 2 pierre Kuo >> 2 tscn92 >> 1 Al Dyrius >> 1 Alberto García Hierro >> 1 Aleksey Shargalin >> 1 Alex J Lennon >> 1 Alexander Kurz >> 1 Alexandre Bourdiol >> 1 Alexey Brodkin >> 1 Anders Westrup >> 1 Andrea Merello >> 1 Andreas Kemnade >> 1 Angus Ainslie >> 1 Anton V. Kirilchik >> 1 Antony Pavlov >> 1 Austin Morton >> 1 Austin Phillips >> 1 Benedikt-Alexander Mokroß >> 1 Boran Car >> 1 Brent Roman >> 1 Brian Brooks >> 1 Byron Kubert >> 1 Caleb Szalacinski >> 1 CezaryGapinski >> 1 Chengyu Zheng >> 1 Christian Meusel >> 1 Christopher Hoover >> 1 Cliff L. Biffle >> 1 Damyan Mitev >> 1 Daniel Glöckner >> 1 Daniel Goehring >> 1 Daniel Krebs >> 1 Daniel Kucera >> 1 Daniel Trnka >> 1 Dennis Ostermann >> 1 Diego Elio Pettenò >> 1 Dongxue Zhang >> 1 EMARD >> 1 Erwin Oegema >> 1 Evan Hunter >> 1 Fabio Utzig >> 1 Faisal Shah >> 1 Frank Hunleth >> 1 Frans-Willem Hardijzer >> 1 Grzegorz Kostka >> 1 Guillaume Revaillot >> 1 Han Hartgers >> 1 Icenowy Zheng >> 1 Ilya Kharin >> 1 James Jacobsson >> 1 James Marshall >> 1 Jan Vojtech >> 1 Jan Čapek >> 1 Jerome Lambourg >> 1 Jim Paris >> 1 Jimmy >> 1 Jānis Skujenieks >> 1 Kamal Dasu >> 1 Keir Fraser >> 1 Kevin Vermilion >> 1 Krzysztof Hockuba >> 1 Luca Dariz >> 1 Luca Lindhorst >> 1 Lucas >> 1 Mara Bos >> 1 Masatoshi Tateishi >> 1 Matej Kogovsek >> 1 Mateusz Manowiecki >> 1 Matthias Bock >> 1 Megan Wachs >> 1 Michael Betz >> 1 Michael Hope >> 1 Michael Schwingen >> 1 Michael Stoll >> 1 Michal Potrzebicz >> 1 Mickaël Thomas >> 1 Moritz 'Morty' Strübe >> 1 Niklas Söderlund >> 1 Oleksandr Redchuk >> 1 Patrick Stewart >> 1 Paul Bartholomew >> 1 Peter Griffin >> 1 Philipp Tomsich >> 1 Pushpal Sidhu >> 1 Rahul Masurkar >> 1 Reto Schneider >> 1 Richard Watts >> 1 Robert Foss >> 1 Rocco Marco Guglielmi >> 1 Rod Boyce >> 1 Rohit Singh >> 1 Roman Elshin >> 1 Samuel Obuch >> 1 Sasha Kozaruk >> 1 Severin Junker >> 1 Simon Qian >> 1 Simon Schubert >> 1 Stafford Horne >> 1 Stefan Arnold >> 1 Svetoslav Enchev >> 1 Sylvain Chouleur >> 1 Tarek BOUCHKATI >> 1 Thomas Søhus >> 1 Tilman Sauerbeck >> 1 Tobias Diedrich >> 1 Tommy Vestermark >> 1 Ulrich-Lorenz Schlüter >> 1 Uwe Bonnes >> 1 YanLin Zhu >> 1 Zale Yu >> 1 barthess >> 1 bob >> 1 elmot >> 1 iosabi >> 1 xuguangxiao >> 1 Łukasz Misek >> >> -- >> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! >> mailto:[email protected] >> _______________________________________________ >> OpenOCD-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/openocd-user >> > _______________________________________________ > OpenOCD-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/openocd-devel >
_______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
