1) What is ke128? I know Kinetis 5V families KE0x, KE1xZ and KE1xF 2) If your device belongs to KE1xZ or KE1xF family, please read http://openocd.org/doc/html/Flash-Commands.html#Flash-Commands especially *Flash Driver: kinetis Kx, KLx, KVx and **KE1x** members of the Kinetis microcontroller family...
*Flash Driver: kinetis_ke KE0x and KEAx members of the Kinetis microcontroller family... **Use kinetis (not kinetis_ke) driver for KE1x devices. ** BTW If you hate reading doc, we have target configuration files ke0x.cfg ke1xf.cfg ke1xz.cfg 3) If you're sure you selected the correct driver, send full -d3 log --- ** [tickets:#303] How to do proper mass erase on ke128 target** **Status:** new **Milestone:** 0.10.0 **Labels:** kinetis_ke **Created:** Wed Apr 28, 2021 03:48 PM UTC by Leo De Luna **Last Updated:** Wed Apr 28, 2021 03:48 PM UTC **Owner:** nobody I've been trying to use kinetis_ke mdm mass_erase but it seems it is not doing the work in completely erasing the chip. May i know if there is a special requirement or setup on the chip? When this command is entered, the error is always be "MDM : flash ready timeout" Im using raspberrypi as my source for swd. --- Sent from sourceforge.net because [email protected] is subscribed to https://sourceforge.net/p/openocd/tickets/ To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list.
