---
** [tickets:#305] Freeze on Mac OS Catalina 10.15.7 (19H1030)**
**Status:** new
**Milestone:** 0.11.0
**Created:** Fri May 28, 2021 02:33 AM UTC by Taras Torshin
**Last Updated:** Fri May 28, 2021 02:33 AM UTC
**Owner:** nobody
~~~
% openocd -s /opt/local/share/openocd/scripts -f board/stm32f469i-disco.cfg -d4
Open On-Chip Debugger 0.11.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
User : 13 13 options.c:63 configuration_output_handler(): debug_level: 4
User : 14 13 options.c:63 configuration_output_handler():
Debug: 15 13 options.c:244 add_default_dirs(): bindir=/opt/local/bin
Debug: 16 13 options.c:245 add_default_dirs():
pkgdatadir=/opt/local/share/openocd
Debug: 17 13 options.c:246 add_default_dirs(): exepath=/opt/local/bin
Debug: 18 13 options.c:247 add_default_dirs(): bin2data=../share/openocd
Debug: 19 13 configuration.c:42 add_script_search_dir(): adding
/Users/general/Library/Preferences/org.openocd
Debug: 20 13 configuration.c:42 add_script_search_dir(): adding
/Users/general/.config/openocd
Debug: 21 13 configuration.c:42 add_script_search_dir(): adding
/Users/general/.openocd
Debug: 22 13 configuration.c:42 add_script_search_dir(): adding
/opt/local/bin/../share/openocd/site
Debug: 23 13 configuration.c:42 add_script_search_dir(): adding
/opt/local/bin/../share/openocd/scripts
Debug: 24 15 configuration.c:97 find_file(): found
/opt/local/share/openocd/scripts/board/stm32f469i-disco.cfg
Debug: 25 17 configuration.c:97 find_file(): found
/opt/local/share/openocd/scripts/interface/stlink.cfg
Debug: 26 17 command.c:146 script_debug(): command - adapter driver hla
Debug: 28 17 command.c:146 script_debug(): command - hla_layout stlink
Debug: 30 17 hla_interface.c:242 hl_interface_handle_layout_command():
hl_interface_handle_layout_command
Debug: 31 17 command.c:146 script_debug(): command - hla_device_desc ST-LINK
Debug: 33 17 hla_interface.c:216 hl_interface_handle_device_desc_command():
hl_interface_handle_device_desc_command
Debug: 34 17 command.c:146 script_debug(): command - hla_vid_pid 0x0483 0x3744
0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483
0x3752 0x0483 0x3753
Debug: 36 17 command.c:146 script_debug(): command - transport select hla_swd
Debug: 37 17 hla_transport.c:205 hl_swd_transport_select():
hl_swd_transport_select
Debug: 38 19 configuration.c:97 find_file(): found
/opt/local/share/openocd/scripts/target/stm32f4x.cfg
Debug: 39 20 configuration.c:97 find_file(): found
/opt/local/share/openocd/scripts/target/swj-dp.tcl
Debug: 40 20 command.c:146 script_debug(): command - transport select
Debug: 41 21 configuration.c:97 find_file(): found
/opt/local/share/openocd/scripts/mem_helper.tcl
Debug: 42 21 command.c:146 script_debug(): command - add_usage_text mrw address
Debug: 44 21 command.c:1115 help_add_command(): added 'mrw' help text
Debug: 45 21 command.c:146 script_debug(): command - add_help_text mrw Returns
value of word in memory.
Debug: 47 21 command.c:1128 help_add_command(): added 'mrw' help text
Debug: 48 21 command.c:146 script_debug(): command - add_usage_text mrh address
Debug: 50 21 command.c:1115 help_add_command(): added 'mrh' help text
Debug: 51 21 command.c:146 script_debug(): command - add_help_text mrh Returns
value of halfword in memory.
Debug: 53 21 command.c:1128 help_add_command(): added 'mrh' help text
Debug: 54 21 command.c:146 script_debug(): command - add_usage_text mrb address
Debug: 56 21 command.c:1115 help_add_command(): added 'mrb' help text
Debug: 57 21 command.c:146 script_debug(): command - add_help_text mrb Returns
value of byte in memory.
Debug: 59 21 command.c:1128 help_add_command(): added 'mrb' help text
Debug: 60 21 command.c:146 script_debug(): command - add_usage_text mmw address
setbits clearbits
Debug: 62 21 command.c:1115 help_add_command(): added 'mmw' help text
Debug: 63 21 command.c:146 script_debug(): command - add_help_text mmw Modify
word in memory. new_val = (old_val & ~clearbits) | setbits;
Debug: 65 21 command.c:1128 help_add_command(): added 'mmw' help text
Debug: 66 21 command.c:146 script_debug(): command - transport select
Debug: 67 21 command.c:146 script_debug(): command - transport select
Debug: 68 21 command.c:146 script_debug(): command - transport select
Debug: 69 21 command.c:146 script_debug(): command - swd newdap stm32f4x cpu
-irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x2ba01477
Debug: 70 21 hla_tcl.c:111 jim_hl_newtap_cmd(): Creating New Tap, Chip:
stm32f4x, Tap: cpu, Dotted: stm32f4x.cpu, 8 params
Debug: 71 21 hla_tcl.c:121 jim_hl_newtap_cmd(): Processing option: -irlen
Debug: 72 21 hla_tcl.c:121 jim_hl_newtap_cmd(): Processing option: -ircapture
Debug: 73 21 hla_tcl.c:121 jim_hl_newtap_cmd(): Processing option: -irmask
Debug: 74 21 hla_tcl.c:121 jim_hl_newtap_cmd(): Processing option: -expected-id
Debug: 75 21 core.c:1488 jtag_tap_init(): Created Tap: stm32f4x.cpu @ abs
position 0, irlen 0, capture: 0x0 mask: 0x0
Debug: 76 21 command.c:146 script_debug(): command - dap create stm32f4x.dap
-chain-position stm32f4x.cpu
Debug: 77 21 command.c:146 script_debug(): command - transport select
Debug: 78 21 command.c:146 script_debug(): command - target create stm32f4x.cpu
cortex_m -endian little -dap stm32f4x.dap
Info : 79 22 target.c:5668 target_create(): The selected transport took over
low-level target control. The results might differ compared to plain JTAG/SWD
Debug: 80 25 hla_target.c:203 adapter_target_create(): adapter_target_create
Debug: 81 25 hla_target.c:173 adapter_init_arch_info(): adapter_init_arch_info
Debug: 82 25 command.c:376 register_command(): command 'rtt' is already
registered in '<global>' context
Debug: 83 25 command.c:146 script_debug(): command - stm32f4x.cpu configure
-work-area-phys 0x20000000 -work-area-size 0x20000 -work-area-backup 0
Debug: 84 25 target.c:2172 target_free_all_working_areas_restore(): freeing all
working areas
Debug: 85 25 target.c:2172 target_free_all_working_areas_restore(): freeing all
working areas
Debug: 86 25 target.c:2172 target_free_all_working_areas_restore(): freeing all
working areas
Debug: 87 25 command.c:146 script_debug(): command - flash bank stm32f4x.flash
stm32f2x 0 0 0 0 stm32f4x.cpu
Debug: 89 27 tcl.c:1319 handle_flash_bank_command(): 'stm32f2x' driver usage
field missing
Debug: 90 27 command.c:146 script_debug(): command - flash bank stm32f4x.otp
stm32f2x 0x1fff7800 0 0 0 stm32f4x.cpu
Debug: 92 27 command.c:376 register_command(): command 'stm32f2x' is already
registered in '<global>' context
Debug: 93 27 command.c:376 register_command(): command 'lock' is already
registered in 'stm32f2x' context
Debug: 94 27 command.c:376 register_command(): command 'unlock' is already
registered in 'stm32f2x' context
Debug: 95 27 command.c:376 register_command(): command 'mass_erase' is already
registered in 'stm32f2x' context
Debug: 96 27 command.c:376 register_command(): command 'options_read' is
already registered in 'stm32f2x' context
Debug: 97 27 command.c:376 register_command(): command 'options_write' is
already registered in 'stm32f2x' context
Debug: 98 27 command.c:376 register_command(): command 'optcr2_write' is
already registered in 'stm32f2x' context
Debug: 99 27 command.c:376 register_command(): command 'otp' is already
registered in 'stm32f2x' context
Debug: 100 27 tcl.c:1319 handle_flash_bank_command(): 'stm32f2x' driver usage
field missing
Debug: 101 27 command.c:146 script_debug(): command - flash list
Debug: 102 27 command.c:146 script_debug(): command - flash bank stm32f4x.qspi
stmqspi 0x90000000 0 0 0 stm32f4x.cpu 0xA0001000
Debug: 104 28 stmqspi.c:216 stmqspi_flash_bank_command():
stmqspi_flash_bank_command
Debug: 105 28 tcl.c:1319 handle_flash_bank_command(): 'stmqspi' driver usage
field missing
Debug: 106 28 command.c:146 script_debug(): command - adapter speed 2000
Debug: 108 28 core.c:1822 jtag_config_khz(): handle jtag khz
Debug: 109 28 core.c:1785 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 110 28 core.c:1785 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 111 28 command.c:146 script_debug(): command - adapter srst delay 100
Debug: 113 28 command.c:146 script_debug(): command - transport select
Debug: 114 28 command.c:146 script_debug(): command - reset_config srst_nogate
Debug: 116 28 command.c:146 script_debug(): command - transport select
Debug: 117 28 command.c:146 script_debug(): command - stm32f4x.cpu configure
-event examine-end
# Enable debug during low power modes (uses more power)
# DBGMCU_CR |= DBG_STANDBY | DBG_STOP | DBG_SLEEP
mmw 0xE0042004 0x00000007 0
# Stop watchdog counters during halt
# DBGMCU_APB1_FZ |= DBG_IWDG_STOP | DBG_WWDG_STOP
mmw 0xE0042008 0x00001800 0
Debug: 118 28 command.c:146 script_debug(): command - stm32f4x.cpu configure
-event trace-config
# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
# change this value accordingly to configure trace pins
# assignment
mmw 0xE0042004 0x00000020 0
Debug: 119 28 command.c:146 script_debug(): command - stm32f4x.cpu configure
-event reset-init
# Configure PLL to boost clock to HSI x 4 (64 MHz)
mww 0x40023804 0x08012008 ;# RCC_PLLCFGR 16 Mhz /8 (M) * 128 (N) /4(P)
mww 0x40023C00 0x00000102 ;# FLASH_ACR = PRFTBE | 2(Latency)
mmw 0x40023800 0x01000000 0 ;# RCC_CR |= PLLON
sleep 10 ;# Wait for PLL to lock
mmw 0x40023808 0x00001000 0 ;# RCC_CFGR |= RCC_CFGR_PPRE1_DIV2
mmw 0x40023808 0x00000002 0 ;# RCC_CFGR |= RCC_CFGR_SW_PLL
# Boost JTAG frequency
adapter speed 8000
Debug: 120 28 command.c:146 script_debug(): command - stm32f4x.cpu configure
-event reset-start
# Reduce speed since CPU speed will slow down to 16MHz with the reset
adapter speed 2000
Debug: 121 28 command.c:146 script_debug(): command - stm32f4x.cpu configure
-event reset-init
mww 0x40023C00 0x00000005 ;# 5 WS for 160
MHz HCLK
sleep 1
mww 0x40023804 0x24002808 ;# 160 MHz:
HSI, PLLM=8, PLLN=160, PLLP=2
mww 0x40023808 0x00009400 ;# APB1: /4,
APB2: /2
mmw 0x40023800 0x01000000 0x00000000 ;# PLL on
sleep 1
mmw 0x40023808 0x00000002 0x00000000 ;# switch to PLL
sleep 1
adapter speed 4000
qspi_init
Info : 122 28 server.c:312 add_service(): Listening on port 6666 for tcl
connections
Info : 123 28 server.c:312 add_service(): Listening on port 4444 for telnet
connections
Debug: 124 28 command.c:146 script_debug(): command - init
Debug: 126 28 command.c:146 script_debug(): command - target init
Debug: 128 28 command.c:146 script_debug(): command - target names
Debug: 129 28 command.c:146 script_debug(): command - stm32f4x.cpu cget -event
gdb-flash-erase-start
Debug: 130 28 command.c:146 script_debug(): command - stm32f4x.cpu configure
-event gdb-flash-erase-start reset init
Debug: 131 28 command.c:146 script_debug(): command - stm32f4x.cpu cget -event
gdb-flash-write-end
Debug: 132 29 command.c:146 script_debug(): command - stm32f4x.cpu configure
-event gdb-flash-write-end reset halt
Debug: 133 29 command.c:146 script_debug(): command - stm32f4x.cpu cget -event
gdb-attach
Debug: 134 29 command.c:146 script_debug(): command - stm32f4x.cpu configure
-event gdb-attach halt 1000
Debug: 135 29 target.c:1639 handle_target_init_command(): Initializing
targets...
Debug: 136 29 hla_target.c:193 adapter_init_target(): adapter_init_target
Debug: 137 29 semihosting_common.c:99 semihosting_common_init():
Debug: 138 29 hla_interface.c:109 hl_interface_init(): hl_interface_init
Debug: 139 29 hla_layout.c:95 hl_layout_init(): hl_layout_init
Debug: 140 29 core.c:1785 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 141 29 core.c:1789 adapter_khz_to_speed(): have interface set up
Debug: 142 29 core.c:1785 adapter_khz_to_speed(): convert khz to interface
specific speed value
Debug: 143 29 core.c:1789 adapter_khz_to_speed(): have interface set up
Info : 144 29 core.c:1565 adapter_init(): clock speed 2000 kHz
Debug: 145 29 openocd.c:143 handle_init_command(): Debug Adapter init complete
Debug: 146 29 command.c:146 script_debug(): command - transport init
Debug: 148 29 transport.c:229 handle_transport_init(): handle_transport_init
Debug: 149 29 hla_transport.c:156 hl_transport_init(): hl_transport_init
Debug: 150 29 hla_transport.c:173 hl_transport_init(): current transport hla_swd
Debug: 151 29 hla_interface.c:42 hl_interface_open(): hl_interface_open
Debug: 152 29 hla_layout.c:40 hl_layout_open(): hl_layout_open
Debug: 153 29 stlink_usb.c:2819 stlink_usb_open(): stlink_usb_open
Debug: 154 29 stlink_usb.c:2833 stlink_usb_open(): transport: 4 vid: 0x0483
pid: 0x3744 serial:
Debug: 155 29 stlink_usb.c:2833 stlink_usb_open(): transport: 4 vid: 0x0483
pid: 0x3748 serial:
Debug: 156 29 stlink_usb.c:2833 stlink_usb_open(): transport: 4 vid: 0x0483
pid: 0x374b serial:
Debug: 157 29 stlink_usb.c:2833 stlink_usb_open(): transport: 4 vid: 0x0483
pid: 0x374d serial:
Debug: 158 29 stlink_usb.c:2833 stlink_usb_open(): transport: 4 vid: 0x0483
pid: 0x374e serial:
Debug: 159 29 stlink_usb.c:2833 stlink_usb_open(): transport: 4 vid: 0x0483
pid: 0x374f serial:
Debug: 160 29 stlink_usb.c:2833 stlink_usb_open(): transport: 4 vid: 0x0483
pid: 0x3752 serial:
Debug: 161 29 stlink_usb.c:2833 stlink_usb_open(): transport: 4 vid: 0x0483
pid: 0x3753 serial:
~~~
Mac OS Catalina 10.15.7 (19H1030)
This is where the output of the application stops, it is impossible to
terminate the application in the terminal via 'ctrl + c', the non-removable
process 'openocd' appears in the system.
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
