This is an automated email from Gerrit. Marc Schink ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/6403
-- gerrit commit af0bca37246e8ce5ac2d46938165c6d174c4b039 Author: Marc Schink <[email protected]> Date: Sat Jul 31 23:51:56 2021 +0200 tcl/interface: Adapt config files to new sysfsgpio command syntax Change-Id: I8e8dee6e8869d2853a7a73c8d4dc8b4891fb0389 Signed-off-by: Marc Schink <[email protected]> diff --git a/tcl/board/novena-internal-fpga.cfg b/tcl/board/novena-internal-fpga.cfg index 0e9ff5b..7805862 100644 --- a/tcl/board/novena-internal-fpga.cfg +++ b/tcl/board/novena-internal-fpga.cfg @@ -19,6 +19,6 @@ adapter driver sysfsgpio transport select jtag # TCK TMS TDI TDO -sysfsgpio_jtag_nums 136 139 137 138 +sysfsgpio jtag_nums 136 139 137 138 source [find cpld/xilinx-xc6s.cfg] diff --git a/tcl/interface/sysfsgpio-raspberrypi.cfg b/tcl/interface/sysfsgpio-raspberrypi.cfg index ebb1502..0030560 100644 --- a/tcl/interface/sysfsgpio-raspberrypi.cfg +++ b/tcl/interface/sysfsgpio-raspberrypi.cfg @@ -12,19 +12,19 @@ adapter driver sysfsgpio # Each of the JTAG lines need a gpio number set: tck tms tdi tdo # Header pin numbers: 23 22 19 21 -sysfsgpio_jtag_nums 11 25 10 9 +sysfsgpio jtag_nums 11 25 10 9 # Each of the SWD lines need a gpio number set: swclk swdio # Header pin numbers: 23 22 -sysfsgpio_swd_nums 11 25 +sysfsgpio swd_nums 11 25 # If you define trst or srst, use appropriate reset_config # Header pin numbers: TRST - 26, SRST - 18 -# sysfsgpio_trst_num 7 +# sysfsgpio trst_num 7 # reset_config trst_only -# sysfsgpio_srst_num 24 +# sysfsgpio srst_num 24 # reset_config srst_only srst_push_pull # or if you have both connected, --
