This is an automated email from Gerrit. Marc Schink ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/6409
-- gerrit commit 28f26ae1212648cf72e6345c4befbfc217cd4054 Author: Marc Schink <[email protected]> Date: Sun Aug 1 14:20:22 2021 +0200 drivers/ft232r: Group adapter commands Use a command group 'ft232r' with subcommands instead of individual commands with 'ft232r_' prefix. The old commands are still available for backward compatibility but marked as deprecated. Change-Id: I0dbeb4716330c83f8ce89b0d054eb0286b887bdf Signed-off-by: Marc Schink <[email protected]> diff --git a/doc/openocd.texi b/doc/openocd.texi index 40f4ab2..340e6b6 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2632,47 +2632,47 @@ FT232R These interfaces have several commands, used to configure the driver before initializing the JTAG scan chain: -@deffn {Config Command} {ft232r_vid_pid} @var{vid} @var{pid} +@deffn {Config Command} {ft232r vid_pid} @var{vid} @var{pid} The vendor ID and product ID of the adapter. If not specified, default 0x0403:0x6001 is used. @end deffn -@deffn {Config Command} {ft232r_serial_desc} @var{serial} +@deffn {Config Command} {ft232r serial_desc} @var{serial} Specifies the @var{serial} of the adapter to use, in case the vendor provides unique IDs and more than one adapter is connected to the host. If not specified, serial numbers are not considered. @end deffn -@deffn {Config Command} {ft232r_jtag_nums} @var{tck} @var{tms} @var{tdi} @var{tdo} +@deffn {Config Command} {ft232r jtag_nums} @var{tck} @var{tms} @var{tdi} @var{tdo} Set four JTAG GPIO numbers at once. If not specified, default 0 3 1 2 or TXD CTS RXD RTS is used. @end deffn -@deffn {Config Command} {ft232r_tck_num} @var{tck} +@deffn {Config Command} {ft232r tck_num} @var{tck} Set TCK GPIO number. If not specified, default 0 or TXD is used. @end deffn -@deffn {Config Command} {ft232r_tms_num} @var{tms} +@deffn {Config Command} {ft232r tms_num} @var{tms} Set TMS GPIO number. If not specified, default 3 or CTS is used. @end deffn -@deffn {Config Command} {ft232r_tdi_num} @var{tdi} +@deffn {Config Command} {ft232r tdi_num} @var{tdi} Set TDI GPIO number. If not specified, default 1 or RXD is used. @end deffn -@deffn {Config Command} {ft232r_tdo_num} @var{tdo} +@deffn {Config Command} {ft232r tdo_num} @var{tdo} Set TDO GPIO number. If not specified, default 2 or RTS is used. @end deffn -@deffn {Config Command} {ft232r_trst_num} @var{trst} +@deffn {Config Command} {ft232r trst_num} @var{trst} Set TRST GPIO number. If not specified, default 4 or DTR is used. @end deffn -@deffn {Config Command} {ft232r_srst_num} @var{srst} +@deffn {Config Command} {ft232r srst_num} @var{srst} Set SRST GPIO number. If not specified, default 6 or DCD is used. @end deffn -@deffn {Config Command} {ft232r_restore_serial} @var{word} +@deffn {Config Command} {ft232r restore_serial} @var{word} Restore serial port after JTAG. This USB bitmode control word (16-bit) will be sent before quit. Lower byte should set GPIO direction register to a "sane" state: diff --git a/src/jtag/drivers/ft232r.c b/src/jtag/drivers/ft232r.c index 3c02925..a99948e 100644 --- a/src/jtag/drivers/ft232r.c +++ b/src/jtag/drivers/ft232r.c @@ -562,70 +562,70 @@ COMMAND_HANDLER(ft232r_handle_restore_serial_command) static const struct command_registration ft232r_command_handlers[] = { { - .name = "ft232r_serial_desc", + .name = "serial_desc", .handler = ft232r_handle_serial_desc_command, .mode = COMMAND_CONFIG, .help = "USB serial descriptor of the adapter", .usage = "serial string", }, { - .name = "ft232r_vid_pid", + .name = "vid_pid", .handler = ft232r_handle_vid_pid_command, .mode = COMMAND_CONFIG, .help = "USB VID and PID of the adapter", .usage = "vid pid", }, { - .name = "ft232r_jtag_nums", + .name = "jtag_nums", .handler = ft232r_handle_jtag_nums_command, .mode = COMMAND_CONFIG, .help = "gpio numbers for tck, tms, tdi, tdo. (in that order)", .usage = "<0-7|TXD-RI> <0-7|TXD-RI> <0-7|TXD-RI> <0-7|TXD-RI>", }, { - .name = "ft232r_tck_num", + .name = "tck_num", .handler = ft232r_handle_tck_num_command, .mode = COMMAND_CONFIG, .help = "gpio number for tck.", .usage = "<0-7|TXD|RXD|RTS|CTS|DTR|DSR|DCD|RI>", }, { - .name = "ft232r_tms_num", + .name = "tms_num", .handler = ft232r_handle_tms_num_command, .mode = COMMAND_CONFIG, .help = "gpio number for tms.", .usage = "<0-7|TXD|RXD|RTS|CTS|DTR|DSR|DCD|RI>", }, { - .name = "ft232r_tdo_num", + .name = "tdo_num", .handler = ft232r_handle_tdo_num_command, .mode = COMMAND_CONFIG, .help = "gpio number for tdo.", .usage = "<0-7|TXD|RXD|RTS|CTS|DTR|DSR|DCD|RI>", }, { - .name = "ft232r_tdi_num", + .name = "tdi_num", .handler = ft232r_handle_tdi_num_command, .mode = COMMAND_CONFIG, .help = "gpio number for tdi.", .usage = "<0-7|TXD|RXD|RTS|CTS|DTR|DSR|DCD|RI>", }, { - .name = "ft232r_srst_num", + .name = "srst_num", .handler = ft232r_handle_srst_num_command, .mode = COMMAND_CONFIG, .help = "gpio number for srst.", .usage = "<0-7|TXD|RXD|RTS|CTS|DTR|DSR|DCD|RI>", }, { - .name = "ft232r_trst_num", + .name = "trst_num", .handler = ft232r_handle_trst_num_command, .mode = COMMAND_CONFIG, .help = "gpio number for trst.", .usage = "<0-7|TXD|RXD|RTS|CTS|DTR|DSR|DCD|RI>", }, { - .name = "ft232r_restore_serial", + .name = "restore_serial", .handler = ft232r_handle_restore_serial_command, .mode = COMMAND_CONFIG, .help = "bitmode control word that restores serial port.", diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl index 4d0f95f..58dc91c 100644 --- a/src/jtag/startup.tcl +++ b/src/jtag/startup.tcl @@ -663,4 +663,64 @@ proc usb_blaster_firmware args { eval usb_blaster firmware $args } +lappend _telnet_autocomplete_skip ft232r_serial_desc +proc ft232r_serial_desc args { + echo "DEPRECATED! use 'ft232r serial_desc' not 'ft232r_serial_desc'" + eval ft232r serial_desc $args +} + +lappend _telnet_autocomplete_skip ft232r_vid_pid +proc ft232r_vid_pid args { + echo "DEPRECATED! use 'ft232r vid_pid' not 'ft232r_vid_pid'" + eval ft232r vid_pid $args +} + +lappend _telnet_autocomplete_skip ft232r_jtag_nums +proc ft232r_jtag_nums args { + echo "DEPRECATED! use 'ft232r jtag_nums' not 'ft232r_jtag_nums'" + eval ft232r jtag_nums $args +} + +lappend _telnet_autocomplete_skip ft232r_tck_num +proc ft232r_tck_num args { + echo "DEPRECATED! use 'ft232r tck_num' not 'ft232r_tck_num'" + eval ft232r tck_num $args +} + +lappend _telnet_autocomplete_skip ft232r_tms_num +proc ft232r_tms_num args { + echo "DEPRECATED! use 'ft232r tms_num' not 'ft232r_tms_num'" + eval ft232r tms_num $args +} + +lappend _telnet_autocomplete_skip ft232r_tdo_num +proc ft232r_tdo_num args { + echo "DEPRECATED! use 'ft232r tdo_num' not 'ft232r_tdo_num'" + eval ft232r tdo_num $args +} + +lappend _telnet_autocomplete_skip ft232r_tdi_num +proc ft232r_tdi_num args { + echo "DEPRECATED! use 'ft232r tdi_num' not 'ft232r_tdi_num'" + eval ft232r tdi_num $args +} + +lappend _telnet_autocomplete_skip ft232r_srst_num +proc ft232r_srst_num args { + echo "DEPRECATED! use 'ft232r srst_num' not 'ft232r_srst_num'" + eval ft232r srst_num $args +} + +lappend _telnet_autocomplete_skip ft232r_trst_num +proc ft232r_trst_num args { + echo "DEPRECATED! use 'ft232r trst_num' not 'ft232r_trst_num'" + eval ft232r trst_num $args +} + +lappend _telnet_autocomplete_skip ft232r_restore_serial +proc ft232r_restore_serial args { + echo "DEPRECATED! use 'ft232r restore_serial' not 'ft232r_restore_serial'" + eval ft232r restore_serial $args +} + # END MIGRATION AIDS --
