This is an automated email from Gerrit. Marc Schink ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/6405
-- gerrit commit fb4e0d963b90632393ca54222fa7f86301dc6efa Author: Marc Schink <[email protected]> Date: Sun Aug 1 14:05:19 2021 +0200 tcl/interface/buspirate: Adapt to new buspirate command syntax Change-Id: I1a82608532f043054abd22eb5b50ab5c5f58cee4 Signed-off-by: Marc Schink <[email protected]> diff --git a/tcl/interface/buspirate.cfg b/tcl/interface/buspirate.cfg index 265e37e..20761d1 100644 --- a/tcl/interface/buspirate.cfg +++ b/tcl/interface/buspirate.cfg @@ -7,19 +7,19 @@ adapter driver buspirate # you need to specify port on which BP lives -#buspirate_port /dev/ttyUSB0 +#buspirate port /dev/ttyUSB0 # communication speed setting -buspirate_speed normal ;# or fast +buspirate speed normal ;# or fast # voltage regulator Enabled = 1 Disabled = 0 -#buspirate_vreg 0 +#buspirate vreg 0 # pin mode normal or open-drain (jtag only) -#buspirate_mode normal +#buspirate mode normal # pullup state Enabled = 1 Disabled = 0 -#buspirate_pullup 0 +#buspirate pullup 0 # this depends on the cable, you are safe with this option reset_config srst_only --
