---
** [tickets:#318] adapter driver presto - not work**
**Status:** new
**Milestone:** 0.11.0
**Created:** Wed Sep 08, 2021 07:25 AM UTC by Michal Hucik
**Last Updated:** Wed Sep 08, 2021 07:25 AM UTC
**Owner:** nobody
I'm trying a first time to use Asix PRESTO with OpenOCD. (this Presto is
normally working with the Asix UP software for Windows)
I tried to use in Windows precompiled OpenOCD 0.11 and in Linux fresh compiled
by me.
In the configuration I use "adapter driver presto", or in addition
"presto_serial 013979". However, on both systems, OpenOCD cannot correctly
initialize PRESTO.
==== Linux dmesg ====
[395089.615983] usb 2-2.2: new full-speed USB device number 29 using uhci_hcd
[395089.820689] usb 2-2.2: New USB device found, idVendor=0403, idProduct=f1a0,
bcdDevice= 4.00
[395089.820693] usb 2-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[395089.820694] usb 2-2.2: Product: ASIX PRESTO
[395089.820696] usb 2-2.2: Manufacturer: ASIX
[395089.820697] usb 2-2.2: SerialNumber: A6013979
==== OpenOCD --debug ====
Debug: 56 5 presto.c:139 presto_open_libftdi(): searching for PRESTO using
libftdi
Error: 57 7 presto.c:149 presto_open_libftdi(): unable to open PRESTO:
usb_open() failed
Error: 58 8 presto.c:540 presto_jtag_init(): Cannot open PRESTO
Debug: 59 8 command.c:629 run_command(): Command 'init' failed with error code
-100
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
