This is an automated email from Gerrit.
"Tim Newsome <t...@sifive.com>" just uploaded a new patch set to Gerrit, which
you can find at https://review.openocd.org/c/openocd/+/6763
-- gerrit
commit 51e31f61e7fc0ca3542859034f4fca8cb9071af2
Author: ZL2WRW <49885788+zl2...@users.noreply.github.com>
Date: Tue Sep 8 07:27:08 2020 +1200
flash/nor/gd32vf103: Add support for GD32VF103
* Backport of GD32VF103 flash driver from
https://github.com/riscv-mcu/riscv-openocd (GPL2 licensed).
* Tested with a "Longan Nano" GD32VF103 dev board and seems to be
working (flash can be read, erased and written).
* Modify src/flash/nor/gd32vf103.c to comply with Travis CI code style
requirements.
* Modified README to include GD32VF103 in list of supported flash devices.
Contributed into riscv-openocd in
https://github.com/riscv/riscv-openocd/pull/518, then edited a few times
to build with newer OpenOCD source (mostly changing `int` to `unsigned
int`).
Signed-off-by: Tim Newsome <t...@sifive.com>
Change-Id: Ibec4a59d1ef47febe90e5924b49c39aa45a7dfa6
diff --git a/README b/README
index 34dac0b1b..44bb7bb60 100644
--- a/README
+++ b/README
@@ -128,13 +128,13 @@ Flash drivers
ADUC702x, AT91SAM, AT91SAM9 (NAND), ATH79, ATmega128RFA1, Atmel SAM, AVR, CFI,
DSP5680xx, EFM32, EM357, eSi-RISC, eSi-TSMC, EZR32HG, FM3, FM4, Freedom E SPI,
-i.MX31, Kinetis, LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPC3180, LPC32xx,
-LPCSPIFI, Marvell QSPI, MAX32, Milandr, MXC, NIIET, nRF51, nRF52 , NuMicro,
-NUC910, Orion/Kirkwood, PIC32mx, PSoC4/5LP/6, Renesas RPC HF and SH QSPI,
-S3C24xx, S3C6400, SiM3x, SiFive Freedom E, Stellaris, ST BlueNRG, STM32,
-STM32 QUAD/OCTO-SPI for Flash/FRAM/EEPROM, STMSMI, STR7x, STR9x, SWM050,
-TI CC13xx, TI CC26xx, TI CC32xx, TI MSP432, Winner Micro w600, Xilinx XCF,
-XMC1xxx, XMC4xxx.
+GD32VF103, i.MX31, Kinetis, LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPC3180,
+LPC32xx, LPCSPIFI, Marvell QSPI, MAX32, Milandr, MXC, NIIET, nRF51, nRF52 ,
+NuMicro, NUC910, Orion/Kirkwood, PIC32mx, PSoC4/5LP/6, Renesas RPC HF and SH
+QSPI, S3C24xx, S3C6400, SiM3x, SiFive Freedom E, Stellaris, ST BlueNRG, STM32,
+STM32 QUAD/OCTO-SPI for Flash/FRAM/EEPROM, STMSMI, STR7x, STR9x, SWM050, TI
+CC13xx, TI CC26xx, TI CC32xx, TI MSP432, Winner Micro w600, Xilinx XCF,
XMC1xxx,
+XMC4xxx.
==================
diff --git a/contrib/loaders/flash/gd32v/gd32vf103.inc
b/contrib/loaders/flash/gd32v/gd32vf103.inc
new file mode 100644
index 000000000..d68b1737e
--- /dev/null
+++ b/contrib/loaders/flash/gd32v/gd32vf103.inc
@@ -0,0 +1,8 @@
+/* Autogenerated with ../../../../src/helper/bin2char.sh */
+0x6f,0x00,0x80,0x00,0x73,0x00,0x10,0x00,0x03,0x2b,0x06,0x00,0x63,0x0c,0x0b,0x04,
+0x83,0x2a,0x46,0x00,0xb3,0x87,0x6a,0x41,0xe3,0x88,0x07,0xfe,0x03,0xdb,0x0a,0x00,
+0x23,0x10,0x67,0x01,0x93,0x8a,0x2a,0x00,0x13,0x07,0x27,0x00,0x83,0x2b,0xc5,0x00,
+0x93,0xf7,0x1b,0x00,0xe3,0x9c,0x07,0xfe,0x93,0xf7,0x4b,0x01,0x63,0x90,0x07,0x02,
+0x63,0xe6,0xda,0x00,0x93,0x0a,0x06,0x00,0x93,0x8a,0x8a,0x00,0x23,0x22,0x56,0x01,
+0x93,0x85,0xf5,0xff,0x63,0x88,0x05,0x00,0x6f,0xf0,0x1f,0xfb,0x13,0x05,0x00,0x00,
+0x23,0x22,0xa6,0x00,0x13,0x85,0x0b,0x00,0x6f,0xf0,0xdf,0xf9,
diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am
index a5ef42210..a09174448 100644
--- a/src/flash/nor/Makefile.am
+++ b/src/flash/nor/Makefile.am
@@ -66,6 +66,7 @@ NOR_DRIVERS = \
%D%/stm32lx.c \
%D%/stm32l4x.c \
%D%/stm32h7x.c \
+ %D%/gd32vf103.c \
%D%/str7x.c \
%D%/str9x.c \
%D%/str9xpec.c \
diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c
index 3e35c0954..dc966ed94 100644
--- a/src/flash/nor/drivers.c
+++ b/src/flash/nor/drivers.c
@@ -44,6 +44,7 @@ extern const struct flash_driver faux_flash;
extern const struct flash_driver fm3_flash;
extern const struct flash_driver fm4_flash;
extern const struct flash_driver fespi_flash;
+extern const struct flash_driver gd32vf103_flash;
extern const struct flash_driver jtagspi_flash;
extern const struct flash_driver kinetis_flash;
extern const struct flash_driver kinetis_ke_flash;
@@ -152,6 +153,7 @@ static const struct flash_driver * const flash_drivers[] = {
&stm32lx_flash,
&stm32l4x_flash,
&stm32h7x_flash,
+ &gd32vf103_flash,
&stmsmi_flash,
&stmqspi_flash,
&str7x_flash,
diff --git a/src/flash/nor/gd32vf103.c b/src/flash/nor/gd32vf103.c
new file mode 100644
index 000000000..562f41e7b
--- /dev/null
+++ b/src/flash/nor/gd32vf103.c
@@ -0,0 +1,1344 @@
+/***************************************************************************
+ *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "imp.h"
+#include <helper/binarybuffer.h>
+#include <target/algorithm.h>
+
+/* gd32vf103 register locations */
+
+#define FLASH_REG_BASE_B0 0x40022000
+#define FLASH_REG_BASE_B1 0x40022040
+
+#define FMC_WS 0x00
+#define FMC_KEY 0x04
+#define FMC_OBKEY 0x08
+#define FMC_STAT 0x0C
+#define FMC_CTL 0x10
+#define FMC_ADDR 0x14
+#define FMC_OBSTAT 0x1C
+
+/* TODO: Check if code using these really should be hard coded to bank 0.
+ * There are valid cases, on dual flash devices the protection of the
+ * second bank is done on the bank0 reg's. */
+#define FMC_WS_B0 0x40022000
+#define FMC_KEY_B0 0x40022004
+#define FMC_OBKEY_B0 0x40022008
+#define FMC_STAT_B0 0x4002200C
+#define FMC_CTL_B0 0x40022010
+#define FMC_ADDR_B0 0x40022014
+#define FMC_OBSTAT_B0 0x4002201C
+#define FMC_WP_B0 0x40022020
+
+/* option byte location */
+
+#define FMC_OB_RDP 0x1FFFF800
+
+/* FMC_CTL register bits */
+
+#define FMC_CTL_PG (1 << 0)
+#define FMC_CTL_PER (1 << 1)
+#define FMC_CTL_MER (1 << 2)
+#define FMC_CTL_OBPG (1 << 4)
+#define FMC_CTL_OBER (1 << 5)
+#define FMC_CTL_START (1 << 6)
+#define FMC_CTL_LK (1 << 7)
+#define FMC_CTL_OBWEN (1 << 9)
+
+/* FMC_STAT register bits */
+
+#define FMC_STAT_BUSY (1 << 0)
+#define FMC_STAT_PGERR (1 << 2)
+#define FMC_STAT_WPERR (1 << 4)
+#define FMC_STAT_ENDF (1 << 5)
+
+/* FMC_OBSTAT bit definitions (reading) */
+
+#define FMC_OBSTAT_OBERR 0
+#define FMC_OBSTAT_SPC 1
+#define FMC_OBSTAT_WDG_SW 2
+#define FMC_OBSTAT_RST_DSLEEP 3
+#define FMC_OBSTAT_RST_STDBY 4
+#define FMC_OBSTAT_BB 5 /* dual flash bank only */
+
+/* register unlock keys */
+
+#define UNLOCK_KEY0 0x45670123
+#define UNLOCK_KEY1 0xCDEF89AB
+
+/* timeout values */
+
+#define FLASH_WRITE_TIMEOUT 500
+#define FLASH_ERASE_TIMEOUT 5000
+
+struct gd32vf103_options {
+ uint16_t RDP;
+ uint16_t user_options;
+ uint16_t user_data;
+ uint16_t protection[4];
+};
+
+struct gd32vf103_flash_bank {
+ struct gd32vf103_options option_bytes;
+ int ppage_size;
+ int probed;
+
+ bool has_dual_banks;
+ /* used to access dual flash bank gd32vf103 */
+ uint32_t register_base;
+ uint16_t default_rdp;
+ int user_data_offset;
+ int option_offset;
+ uint32_t user_bank_size;
+};
+
+static int gd32vf103_mass_erase(struct flash_bank *bank);
+static int get_gd32vf103_info(struct flash_bank *bank, struct
command_invocation *cmd);
+static int gd32vf103_write_block(struct flash_bank *bank, const uint8_t
*buffer,
+ uint32_t offset, uint32_t count);
+
+/* flash bank gd32vf103 <base> <size> 0 0 <target#>
+ */
+FLASH_BANK_COMMAND_HANDLER(gd32vf103_flash_bank_command)
+{
+ struct gd32vf103_flash_bank *gd32vf103_info;
+
+ if (CMD_ARGC < 6)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ gd32vf103_info = malloc(sizeof(struct gd32vf103_flash_bank));
+
+ bank->driver_priv = gd32vf103_info;
+ gd32vf103_info->probed = 0;
+ gd32vf103_info->has_dual_banks = false;
+ gd32vf103_info->register_base = FLASH_REG_BASE_B0;
+ gd32vf103_info->user_bank_size = bank->size;
+
+ return ERROR_OK;
+}
+
+static inline int gd32vf103_get_flash_reg(struct flash_bank *bank, uint32_t
reg)
+{
+ struct gd32vf103_flash_bank *gd32vf103_info = bank->driver_priv;
+ return reg + gd32vf103_info->register_base;
+}
+
+static inline int gd32vf103_get_flash_status(struct flash_bank *bank, uint32_t
*status)
+{
+ struct target *target = bank->target;
+ return target_read_u32(target, gd32vf103_get_flash_reg(bank, FMC_STAT),
status);
+}
+
+static int gd32vf103_wait_status_busy(struct flash_bank *bank, int timeout)
+{
+ struct target *target = bank->target;
+ uint32_t status;
+ int retval = ERROR_OK;
+
+ /* wait for busy to clear */
+ for (;;) {
+ retval = gd32vf103_get_flash_status(bank, &status);
+ if (retval != ERROR_OK)
+ return retval;
+ LOG_DEBUG("status: 0x%" PRIx32 "", status);
+ if ((status & FMC_STAT_BUSY) == 0)
+ break;
+ if (timeout-- <= 0) {
+ LOG_ERROR("timed out waiting for flash");
+ return ERROR_FAIL;
+ }
+ alive_sleep(1);
+ }
+
+ if (status & FMC_STAT_WPERR) {
+ LOG_ERROR("gd32vf103 device protected");
+ retval = ERROR_FAIL;
+ }
+
+ if (status & FMC_STAT_PGERR) {
+ LOG_ERROR("gd32vf103 device programming failed");
+ retval = ERROR_FAIL;
+ }
+
+ /* Clear but report errors */
+ if (status & (FMC_STAT_WPERR | FMC_STAT_PGERR)) {
+ /* If this operation fails, we ignore it and report the original
+ * retval
+ */
+ target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_STAT),
+ FMC_STAT_WPERR | FMC_STAT_PGERR);
+ }
+ return retval;
+}
+
+static int gd32vf103_check_operation_supported(struct flash_bank *bank)
+{
+ struct gd32vf103_flash_bank *gd32vf103_info = bank->driver_priv;
+
+ /* if we have a dual flash bank device then
+ * we need to perform option byte stuff on bank0 only */
+ if (gd32vf103_info->register_base != FLASH_REG_BASE_B0) {
+ LOG_ERROR("Option Byte Operation's must use bank0");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+static int gd32vf103_read_options(struct flash_bank *bank)
+{
+ uint32_t optiondata;
+ struct gd32vf103_flash_bank *gd32vf103_info = NULL;
+ struct target *target = bank->target;
+
+ gd32vf103_info = bank->driver_priv;
+
+ /* read current option bytes */
+ int retval = target_read_u32(target, FMC_OBSTAT_B0, &optiondata);
+ if (retval != ERROR_OK)
+ return retval;
+
+ gd32vf103_info->option_bytes.user_options = (optiondata >>
gd32vf103_info->option_offset >> 2) & 0xffff;
+ gd32vf103_info->option_bytes.user_data = (optiondata >>
gd32vf103_info->user_data_offset) & 0xffff;
+ gd32vf103_info->option_bytes.RDP = (optiondata & (1 << FMC_OBSTAT_SPC))
? 0xFFFF : 0x5AA5;
+
+ if (optiondata & (1 << FMC_OBSTAT_SPC))
+ LOG_INFO("Device Security Bit Set");
+
+ /* each bit refers to a 4bank protection */
+ retval = target_read_u32(target, FMC_WP_B0, &optiondata);
+ if (retval != ERROR_OK)
+ return retval;
+
+ gd32vf103_info->option_bytes.protection[0] = (uint16_t)optiondata;
+ gd32vf103_info->option_bytes.protection[1] = (uint16_t)(optiondata >>
8);
+ gd32vf103_info->option_bytes.protection[2] = (uint16_t)(optiondata >>
16);
+ gd32vf103_info->option_bytes.protection[3] = (uint16_t)(optiondata >>
24);
+
+ return ERROR_OK;
+}
+
+static int gd32vf103_erase_options(struct flash_bank *bank)
+{
+ struct gd32vf103_flash_bank *gd32vf103_info = NULL;
+ struct target *target = bank->target;
+
+ gd32vf103_info = bank->driver_priv;
+
+ /* read current options */
+ gd32vf103_read_options(bank);
+
+ /* unlock flash registers */
+ int retval = target_write_u32(target, FMC_KEY_B0, UNLOCK_KEY0);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_write_u32(target, FMC_KEY_B0, UNLOCK_KEY1);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* unlock option flash registers */
+ retval = target_write_u32(target, FMC_OBKEY_B0, UNLOCK_KEY0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, FMC_OBKEY_B0, UNLOCK_KEY1);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* erase option bytes */
+ retval = target_write_u32(target, FMC_CTL_B0, FMC_CTL_OBER |
FMC_CTL_OBWEN);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, FMC_CTL_B0, FMC_CTL_OBER |
FMC_CTL_START | FMC_CTL_OBWEN);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = gd32vf103_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* clear readout protection and complementary option bytes
+ * this will also force a device unlock if set */
+ gd32vf103_info->option_bytes.RDP = gd32vf103_info->default_rdp;
+
+ return ERROR_OK;
+}
+
+static int gd32vf103_write_options(struct flash_bank *bank)
+{
+ struct gd32vf103_flash_bank *gd32vf103_info = NULL;
+ struct target *target = bank->target;
+
+ gd32vf103_info = bank->driver_priv;
+
+ /* unlock flash registers */
+ int retval = target_write_u32(target, FMC_KEY_B0, UNLOCK_KEY0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, FMC_KEY_B0, UNLOCK_KEY1);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* unlock option flash registers */
+ retval = target_write_u32(target, FMC_OBKEY_B0, UNLOCK_KEY0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, FMC_OBKEY_B0, UNLOCK_KEY1);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* program option bytes */
+ retval = target_write_u32(target, FMC_CTL_B0, FMC_CTL_OBPG |
FMC_CTL_OBWEN);
+ if (retval != ERROR_OK)
+ return retval;
+
+ uint8_t opt_bytes[16];
+
+ target_buffer_set_u16(target, opt_bytes,
gd32vf103_info->option_bytes.RDP); /* SPC */
+ target_buffer_set_u16(target, opt_bytes + 2,
gd32vf103_info->option_bytes.user_options); /* USER */
+ target_buffer_set_u16(target, opt_bytes + 4,
gd32vf103_info->option_bytes.user_data & 0xff); /* DATA[7:0] */
+ target_buffer_set_u16(target, opt_bytes + 6,
(gd32vf103_info->option_bytes.user_data >> 8) & 0xff); /* DATA[15:8] */
+ target_buffer_set_u16(target, opt_bytes + 8,
gd32vf103_info->option_bytes.protection[0]); /* WP[7:0] */
+ target_buffer_set_u16(target, opt_bytes + 10,
gd32vf103_info->option_bytes.protection[1]); /* WP[15:8] */
+ target_buffer_set_u16(target, opt_bytes + 12,
gd32vf103_info->option_bytes.protection[2]); /* WP[23:16] */
+ target_buffer_set_u16(target, opt_bytes + 14,
gd32vf103_info->option_bytes.protection[3]); /* WP[31:24] */
+
+ uint32_t offset = FMC_OB_RDP - bank->base;
+ retval = gd32vf103_write_block(bank, opt_bytes, offset,
sizeof(opt_bytes) / 2);
+ if (retval != ERROR_OK) {
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+ LOG_ERROR("working area required to erase options
bytes");
+ return retval;
+ }
+
+ retval = target_write_u32(target, FMC_CTL_B0, FMC_CTL_LK);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return ERROR_OK;
+}
+
+static int gd32vf103_protect_check(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ struct gd32vf103_flash_bank *gd32vf103_info = bank->driver_priv;
+
+ uint32_t protection;
+ int i;
+ int num_bits;
+ int set;
+
+ int retval = gd32vf103_check_operation_supported(bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ /* medium density - each bit refers to a 4bank protection
+ * high density - each bit refers to a 2bank protection */
+ retval = target_read_u32(target, FMC_WP_B0, &protection);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* medium density - each protection bit is for 4 * 1K pages
+ * high density - each protection bit is for 2 * 2K pages */
+ num_bits = (bank->num_sectors / gd32vf103_info->ppage_size);
+
+ if (gd32vf103_info->ppage_size == 2) {
+ /* high density flash/connectivity line protection */
+
+ set = 1;
+
+ if (protection & (1 << 31))
+ set = 0;
+
+ /* bit 31 controls sector 62 - 255 protection for high density
+ * bit 31 controls sector 62 - 127 protection for connectivity
line */
+ for (unsigned s = 62; s < bank->num_sectors; s++)
+ bank->sectors[s].is_protected = set;
+
+ if (bank->num_sectors > 61)
+ num_bits = 31;
+
+ for (i = 0; i < num_bits; i++) {
+ set = 1;
+
+ if (protection & (1 << i))
+ set = 0;
+
+ for (int s = 0; s < gd32vf103_info->ppage_size; s++)
+ bank->sectors[(i * gd32vf103_info->ppage_size)
+ s].is_protected = set;
+ }
+ } else {
+ /* low/medium density flash protection */
+ for (i = 0; i < num_bits; i++) {
+ set = 1;
+
+ if (protection & (1 << i))
+ set = 0;
+
+ for (int s = 0; s < gd32vf103_info->ppage_size; s++)
+ bank->sectors[(i * gd32vf103_info->ppage_size)
+ s].is_protected = set;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+static int gd32vf103_erase(struct flash_bank *bank, unsigned first, unsigned
last)
+{
+ struct target *target = bank->target;
+ uint32_t optiondata;
+ uint32_t obstat;
+
+ struct gd32vf103_flash_bank *gd32vf103_info = NULL;
+ gd32vf103_info = bank->driver_priv;
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+ target_read_u32(target, FMC_WP_B0, &optiondata);
+ target_read_u32(target, FMC_OBSTAT_B0, &obstat);
+ if ((0xFFFFFFFF != optiondata) || ((obstat & 0x2) != 0)) {
+ gd32vf103_erase_options(bank);
+ optiondata = 0xFFFFFFFF;
+ gd32vf103_info->option_bytes.RDP = 0x5AA5;
+ gd32vf103_info->option_bytes.protection[0] =
(uint16_t)optiondata;
+ gd32vf103_info->option_bytes.protection[1] =
(uint16_t)(optiondata >> 8);
+ gd32vf103_info->option_bytes.protection[2] =
(uint16_t)(optiondata >> 16);
+ gd32vf103_info->option_bytes.protection[3] =
(uint16_t)(optiondata >> 24);
+
+ gd32vf103_write_options(bank);
+ LOG_INFO(" Unlock flash Sucess !!! Pls Reset Platfrom !!\n");
+ return ERROR_FAIL;
+ }
+ if ((first == 0) && (last == (bank->num_sectors - 1)))
+ return gd32vf103_mass_erase(bank);
+
+ /* unlock flash registers */
+ int retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_KEY), UNLOCK_KEY0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_KEY), UNLOCK_KEY1);
+ if (retval != ERROR_OK)
+ return retval;
+
+ for (unsigned i = first; i <= last; i++) {
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_CTL), FMC_CTL_PER);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_ADDR),
+ bank->base + bank->sectors[i].offset);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target,
+ gd32vf103_get_flash_reg(bank, FMC_CTL),
FMC_CTL_PER | FMC_CTL_START);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = gd32vf103_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
+
+ bank->sectors[i].is_erased = 1;
+ }
+
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_CTL), FMC_CTL_LK);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return ERROR_OK;
+}
+
+static int gd32vf103_protect(struct flash_bank *bank, int set, unsigned first,
unsigned last)
+{
+ struct gd32vf103_flash_bank *gd32vf103_info = NULL;
+ struct target *target = bank->target;
+ uint16_t prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
+ int reg, bit;
+ int status;
+ uint32_t protection;
+
+ gd32vf103_info = bank->driver_priv;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ int retval = gd32vf103_check_operation_supported(bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ if ((first % gd32vf103_info->ppage_size) != 0) {
+ LOG_WARNING("aligned start protect sector to a %d sector
boundary",
+ gd32vf103_info->ppage_size);
+ first = first - (first % gd32vf103_info->ppage_size);
+ }
+ if (((last + 1) % gd32vf103_info->ppage_size) != 0) {
+ LOG_WARNING("aligned end protect sector to a %d sector
boundary",
+ gd32vf103_info->ppage_size);
+ last++;
+ last = last - (last % gd32vf103_info->ppage_size);
+ last--;
+ }
+
+ /* medium density - each bit refers to a 4bank protection
+ * high density - each bit refers to a 2bank protection */
+ retval = target_read_u32(target, FMC_WP_B0, &protection);
+ if (retval != ERROR_OK)
+ return retval;
+
+ prot_reg[0] = (uint16_t)protection;
+ prot_reg[1] = (uint16_t)(protection >> 8);
+ prot_reg[2] = (uint16_t)(protection >> 16);
+ prot_reg[3] = (uint16_t)(protection >> 24);
+
+ if (gd32vf103_info->ppage_size == 2) {
+ /* high density flash */
+
+ /* bit 7 controls sector 62 - 255 protection */
+ if (last > 61) {
+ if (set)
+ prot_reg[3] &= ~(1 << 7);
+ else
+ prot_reg[3] |= (1 << 7);
+ }
+
+ if (first > 61)
+ first = 62;
+ if (last > 61)
+ last = 61;
+
+ for (unsigned i = first; i <= last; i++) {
+ reg = (i / gd32vf103_info->ppage_size) / 8;
+ bit = (i / gd32vf103_info->ppage_size) - (reg * 8);
+
+ if (set)
+ prot_reg[reg] &= ~(1 << bit);
+ else
+ prot_reg[reg] |= (1 << bit);
+ }
+ } else {
+ /* medium density flash */
+ for (unsigned i = first; i <= last; i++) {
+ reg = (i / gd32vf103_info->ppage_size) / 8;
+ bit = (i / gd32vf103_info->ppage_size) - (reg * 8);
+
+ if (set)
+ prot_reg[reg] &= ~(1 << bit);
+ else
+ prot_reg[reg] |= (1 << bit);
+ }
+ }
+
+ status = gd32vf103_erase_options(bank);
+ if (status != ERROR_OK)
+ return status;
+
+ gd32vf103_info->option_bytes.protection[0] = prot_reg[0];
+ gd32vf103_info->option_bytes.protection[1] = prot_reg[1];
+ gd32vf103_info->option_bytes.protection[2] = prot_reg[2];
+ gd32vf103_info->option_bytes.protection[3] = prot_reg[3];
+
+ return gd32vf103_write_options(bank);
+}
+
+static int gd32vf103_write_block(struct flash_bank *bank, const uint8_t
*buffer,
+ uint32_t offset, uint32_t count)
+{
+ struct gd32vf103_flash_bank *gd32vf103_info = bank->driver_priv;
+ struct target *target = bank->target;
+ uint32_t buffer_size = 16384;
+ struct working_area *write_algorithm;
+ struct working_area *source;
+ uint32_t address = bank->base + offset;
+ struct reg_param reg_params[5];
+ int retval = ERROR_OK;
+
+ static const uint8_t gd32vf103_flash_write_code[] = {
+#include "../../../contrib/loaders/flash/gd32v/gd32vf103.inc"
+ };
+
+ /* flash write code */
+ if (target_alloc_working_area(target,
sizeof(gd32vf103_flash_write_code),
+ &write_algorithm) != ERROR_OK) {
+ LOG_WARNING("no working area available, can't do block memory
writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ retval = target_write_buffer(target, write_algorithm->address,
+ sizeof(gd32vf103_flash_write_code),
gd32vf103_flash_write_code);
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
+ return retval;
+ }
+
+ /* memory buffer */
+ while (target_alloc_working_area_try(target, buffer_size, &source) !=
ERROR_OK) {
+ buffer_size /= 2;
+ buffer_size &= ~3UL; /* Make sure it's 4 byte aligned */
+ if (buffer_size <= 256) {
+ /* we already allocated the writing code, but failed to
get a
+ * buffer, free the algorithm */
+ target_free_working_area(target, write_algorithm);
+
+ LOG_WARNING("no large enough working area available,
can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ }
+
+ init_reg_param(®_params[0], "a0", 32, PARAM_IN_OUT); /* flash base
(in), status (out) */
+ init_reg_param(®_params[1], "a1", 32, PARAM_OUT); /* count
(halfword-16bit) */
+ init_reg_param(®_params[2], "a2", 32, PARAM_OUT); /* buffer start
*/
+ init_reg_param(®_params[3], "a3", 32, PARAM_OUT); /* buffer end */
+ init_reg_param(®_params[4], "a4", 32, PARAM_IN_OUT); /* target
address */
+
+
+ uint32_t wp_addr = source->address;
+ uint32_t rp_addr = source->address + 4;
+ uint32_t fifo_start_addr = source->address + 8;
+ uint32_t fifo_end_addr = source->address + source->size;
+
+ uint32_t wp = fifo_start_addr;
+ uint32_t rp = fifo_start_addr;
+ uint32_t thisrun_bytes = fifo_end_addr-fifo_start_addr-2; /* (2:block
size) */
+
+ retval = target_write_u32(target, rp_addr, rp);
+ if (retval != ERROR_OK)
+ return retval;
+
+ while (count > 0) {
+ retval = target_read_u32(target, rp_addr, &rp);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("failed to get read pointer");
+ break;
+ }
+
+ if (wp != rp) {
+ LOG_ERROR("Failed to write flash ;; rp = 0x%x ;;; wp =
0x%x", rp, wp);
+ break;
+ }
+ wp = fifo_start_addr;
+ rp = fifo_start_addr;
+ retval = target_write_u32(target, rp_addr, rp);
+ if (retval != ERROR_OK)
+ break;
+ /* Limit to the amount of data we actually want to write */
+ if (thisrun_bytes > count * 2)
+ thisrun_bytes = count * 2;
+
+ /* Write data to fifo */
+ retval = target_write_buffer(target, wp, thisrun_bytes, buffer);
+ if (retval != ERROR_OK)
+ break;
+
+ /* Update counters and wrap write pointer */
+ buffer += thisrun_bytes;
+ count -= thisrun_bytes / 2;
+ rp = fifo_start_addr;
+ wp = fifo_start_addr+thisrun_bytes;
+
+ /* Store updated write pointer to target */
+ retval = target_write_u32(target, wp_addr, wp);
+ if (retval != ERROR_OK)
+ break;
+ retval = target_write_u32(target, rp_addr, rp);
+ if (retval != ERROR_OK)
+ return retval;
+
+ buf_set_u32(reg_params[0].value, 0, 32,
gd32vf103_info->register_base);
+ buf_set_u32(reg_params[1].value, 0, 32, thisrun_bytes/2);
+ buf_set_u32(reg_params[2].value, 0, 32, source->address);
+ buf_set_u32(reg_params[3].value, 0, 32, source->address +
source->size);
+ buf_set_u32(reg_params[4].value, 0, 32, address);
+
+ retval = target_run_algorithm(target, 0, NULL, 5, reg_params,
+ write_algorithm->address,
write_algorithm->address+4,
+ 10000, NULL);
+
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed to execute algorithm at 0x%"
TARGET_PRIxADDR ": %d",
+ write_algorithm->address, retval);
+ return retval;
+ }
+ address += thisrun_bytes;
+
+ }
+
+
+ if (retval == ERROR_FLASH_OPERATION_FAILED) {
+ LOG_ERROR("flash write failed at address 0x%"PRIx32,
+ buf_get_u32(reg_params[4].value, 0, 32));
+
+ if (buf_get_u32(reg_params[0].value, 0, 32) & FMC_STAT_PGERR) {
+ LOG_ERROR("flash memory not erased before writing");
+ /* Clear but report errors */
+ target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_STAT), FMC_STAT_PGERR);
+ }
+
+ if (buf_get_u32(reg_params[0].value, 0, 32) & FMC_STAT_WPERR) {
+ LOG_ERROR("flash memory write protected");
+ /* Clear but report errors */
+ target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_STAT), FMC_STAT_WPERR);
+ }
+ }
+
+ target_free_working_area(target, source);
+ target_free_working_area(target, write_algorithm);
+
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+ destroy_reg_param(®_params[3]);
+ destroy_reg_param(®_params[4]);
+
+ return retval;
+}
+
+static int gd32vf103_write(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
+{
+ struct target *target = bank->target;
+ uint8_t *new_buffer = NULL;
+
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (offset & 0x1) {
+ LOG_ERROR("offset 0x%" PRIx32 " breaks required 2-byte
alignment", offset);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ /* If there's an odd number of bytes, the data has to be padded.
Duplicate
+ * the buffer and use the normal code path with a single block write
since
+ * it's probably cheaper than to special case the last odd write using
+ * discrete accesses. */
+ if (count & 1) {
+ new_buffer = malloc(count + 1);
+ if (new_buffer == NULL) {
+ LOG_ERROR("odd number of bytes to write and no memory
for padding buffer");
+ return ERROR_FAIL;
+ }
+ LOG_INFO("odd number of bytes to write, padding with 0xff");
+ buffer = memcpy(new_buffer, buffer, count);
+ new_buffer[count++] = 0xff;
+ }
+
+ uint32_t words_remaining = count / 2;
+ int retval, retval2;
+
+ /* unlock flash registers */
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_KEY), UNLOCK_KEY0);
+ if (retval != ERROR_OK)
+ goto cleanup;
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_KEY), UNLOCK_KEY1);
+ if (retval != ERROR_OK)
+ goto cleanup;
+
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_CTL), FMC_CTL_PG);
+ if (retval != ERROR_OK)
+ goto cleanup;
+
+ /* try using a block write */
+ retval = gd32vf103_write_block(bank, buffer, offset, words_remaining);
+
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
+ /* if block write failed (no sufficient working area),
+ * we use normal (slow) single halfword accesses */
+ LOG_WARNING("couldn't use block writes, falling back to single
memory accesses");
+
+ while (words_remaining > 0) {
+ uint16_t value;
+ memcpy(&value, buffer, sizeof(uint16_t));
+
+ retval = target_write_u16(target, bank->base + offset,
value);
+ if (retval != ERROR_OK)
+ goto reset_pg_and_lock;
+
+ retval = gd32vf103_wait_status_busy(bank, 5);
+ if (retval != ERROR_OK)
+ goto reset_pg_and_lock;
+
+ words_remaining--;
+ buffer += 2;
+ offset += 2;
+ }
+ }
+
+reset_pg_and_lock:
+ retval2 = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_CTL), FMC_CTL_LK);
+ if (retval == ERROR_OK)
+ retval = retval2;
+
+cleanup:
+ if (new_buffer)
+ free(new_buffer);
+
+ return retval;
+}
+
+static int gd32vf103_get_device_id(struct flash_bank *bank, uint32_t
*device_id)
+{
+
+ struct target *target = bank->target;
+ uint32_t device_id_register = 0xE0042000;
+ /* read GD32VF103 device id register */
+ int retval = target_read_u32(target, device_id_register, device_id);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return retval;
+}
+
+static int gd32vf103_get_flash_size(struct flash_bank *bank, uint16_t
*flash_size_in_kb)
+{
+ struct target *target = bank->target;
+ uint32_t flash_size_reg = 0x1FFFF7E0;
+
+ int retval = target_read_u16(target, flash_size_reg, flash_size_in_kb);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return retval;
+}
+
+static int gd32vf103_probe(struct flash_bank *bank)
+{
+ struct gd32vf103_flash_bank *gd32vf103_info = bank->driver_priv;
+ int i;
+ uint16_t flash_size_in_kb;
+ uint16_t max_flash_size_in_kb;
+ uint32_t device_id;
+ int page_size;
+ uint32_t base_address = 0x08000000;
+
+ gd32vf103_info->probed = 0;
+ gd32vf103_info->register_base = FLASH_REG_BASE_B0;
+ gd32vf103_info->user_data_offset = 10;
+ gd32vf103_info->option_offset = 0;
+
+ /* default factory protection level */
+ gd32vf103_info->default_rdp = 0x5AA5;
+
+ /* read gd32vf103 device id register */
+ int retval = gd32vf103_get_device_id(bank, &device_id);
+ if (retval != ERROR_OK)
+ return retval;
+
+ LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
+
+ /* set page size, protection granularity and max flash size depending
on family */
+ switch (device_id & 0xfff) {
+ case 0x410:
+ case 0x418: /* connectivity line density */
+ page_size = 1024;
+ gd32vf103_info->ppage_size = 4;
+ max_flash_size_in_kb = 128;
+ break;
+ default:
+ LOG_WARNING("Cannot identify target as a gd32vf103
family.");
+ return ERROR_FAIL;
+ }
+
+ /* get flash size from target. */
+ retval = gd32vf103_get_flash_size(bank, &flash_size_in_kb);
+ LOG_INFO("flash_size_in_kb = 0x%08" PRIx32 "", flash_size_in_kb);
+ /* failed reading flash size or flash size invalid, default to max
target family */
+ if (retval != ERROR_OK || flash_size_in_kb == 0xffff ||
flash_size_in_kb == 0) {
+ LOG_WARNING("gd32vf103 flash size failed, probe inaccurate -
assuming %dk flash",
+ max_flash_size_in_kb);
+ flash_size_in_kb = max_flash_size_in_kb;
+ }
+
+ if (gd32vf103_info->has_dual_banks) {
+ /* split reported size into matching bank */
+ if (bank->base != 0x08080000) {
+ /* bank 0 will be fixed 512k */
+ flash_size_in_kb = 512;
+ } else {
+ flash_size_in_kb -= 512;
+ /* bank1 also uses a register offset */
+ gd32vf103_info->register_base = FLASH_REG_BASE_B1;
+ base_address = 0x08080000;
+ }
+ }
+
+ /* if the user sets the size manually then ignore the probed value
+ * this allows us to work around devices that have a invalid flash size
register value */
+ if (gd32vf103_info->user_bank_size) {
+ LOG_INFO("ignoring flash probed value, using configured bank
size");
+ flash_size_in_kb = gd32vf103_info->user_bank_size / 1024;
+ }
+
+ LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
+
+ /* did we assign flash size? */
+ assert(flash_size_in_kb != 0xffff);
+
+ /* calculate numbers of pages */
+ int num_pages = flash_size_in_kb * 1024 / page_size;
+
+ /* check that calculation result makes sense */
+ assert(num_pages > 0);
+
+ if (bank->sectors) {
+ free(bank->sectors);
+ bank->sectors = NULL;
+ }
+
+ bank->base = base_address;
+ bank->size = (num_pages * page_size);
+ bank->num_sectors = num_pages;
+ bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
+
+ for (i = 0; i < num_pages; i++) {
+ bank->sectors[i].offset = i * page_size;
+ bank->sectors[i].size = page_size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+
+ gd32vf103_info->probed = 1;
+
+ return ERROR_OK;
+}
+
+static int gd32vf103_auto_probe(struct flash_bank *bank)
+{
+ struct gd32vf103_flash_bank *gd32vf103_info = bank->driver_priv;
+ if (gd32vf103_info->probed)
+ return ERROR_OK;
+ return gd32vf103_probe(bank);
+}
+
+static int get_gd32vf103_info(struct flash_bank *bank, struct
command_invocation *cmd)
+{
+ uint32_t dbgmcu_idcode;
+
+ /* read gd32vf103 device id register */
+ int retval = gd32vf103_get_device_id(bank, &dbgmcu_idcode);
+ if (retval != ERROR_OK)
+ return retval;
+
+ uint16_t device_id = dbgmcu_idcode & 0xfff;
+ uint16_t rev_id = dbgmcu_idcode >> 16;
+ const char *device_str;
+ const char *rev_str = NULL;
+
+ switch (device_id) {
+
+ case 0x418:
+ device_str = "gd32vf103 (gdm32501)";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+
+ case 0x1001:
+ rev_str = "B";
+ break;
+ }
+ break;
+ default:
+ command_print_sameline(cmd, "Cannot identify target as a
GD32VF103 x\n");
+ return ERROR_FAIL;
+ }
+
+ if (rev_str != NULL)
+ command_print_sameline(cmd, "%s - Rev: %s\n", device_str,
rev_str);
+ else
+ command_print_sameline(cmd, "%s - Rev: unknown (0x%04x)\n",
device_str, rev_id);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(gd32vf103_handle_lock_command)
+{
+ struct target *target = NULL;
+ struct gd32vf103_flash_bank *gd32vf103_info = NULL;
+
+ if (CMD_ARGC < 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ gd32vf103_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ retval = gd32vf103_check_operation_supported(bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ if (gd32vf103_erase_options(bank) != ERROR_OK) {
+ command_print(CMD, "gd32vf103 failed to erase options");
+ return ERROR_OK;
+ }
+
+ /* set readout protection */
+ gd32vf103_info->option_bytes.RDP = 0;
+
+ if (gd32vf103_write_options(bank) != ERROR_OK) {
+ command_print(CMD, "gd32vf103 failed to lock device");
+ return ERROR_OK;
+ }
+
+ command_print(CMD, "gd32vf103 locked");
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(gd32vf103_handle_unlock_command)
+{
+ struct target *target = NULL;
+
+ if (CMD_ARGC < 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ retval = gd32vf103_check_operation_supported(bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ if (gd32vf103_erase_options(bank) != ERROR_OK) {
+ command_print(CMD, "gd32vf103 failed to unlock device");
+ return ERROR_OK;
+ }
+
+ if (gd32vf103_write_options(bank) != ERROR_OK) {
+ command_print(CMD, "gd32vf103 failed to lock device");
+ return ERROR_OK;
+ }
+
+ command_print(CMD, "gd32vf103 unlocked.\n"
+ "INFO: a reset or power cycle is required "
+ "for the new settings to take effect.");
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(gd32vf103_handle_options_read_command)
+{
+ uint32_t optionbyte;
+ struct target *target = NULL;
+ struct gd32vf103_flash_bank *gd32vf103_info = NULL;
+
+ if (CMD_ARGC < 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ gd32vf103_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ retval = gd32vf103_check_operation_supported(bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ retval = target_read_u32(target, FMC_OBSTAT_B0, &optionbyte);
+ if (retval != ERROR_OK)
+ return retval;
+ command_print(CMD, "Option Byte: 0x%" PRIx32 "", optionbyte);
+
+ int user_data = optionbyte;
+
+ if (optionbyte >> FMC_OBSTAT_OBERR & 1)
+ command_print(CMD, "Option Byte Complement Error");
+
+ if (optionbyte >> FMC_OBSTAT_SPC & 1)
+ command_print(CMD, "Readout Protection On");
+ else
+ command_print(CMD, "Readout Protection Off");
+
+ /* user option bytes are offset depending on variant */
+ optionbyte >>= gd32vf103_info->option_offset;
+
+ if (optionbyte >> FMC_OBSTAT_WDG_SW & 1)
+ command_print(CMD, "Software Watchdog");
+ else
+ command_print(CMD, "Hardware Watchdog");
+
+ if (optionbyte >> FMC_OBSTAT_RST_DSLEEP & 1)
+ command_print(CMD, "Stop: No reset generated");
+ else
+ command_print(CMD, "Stop: Reset generated");
+
+ if (optionbyte >> FMC_OBSTAT_RST_STDBY & 1)
+ command_print(CMD, "Standby: No reset generated");
+ else
+ command_print(CMD, "Standby: Reset generated");
+
+ if (gd32vf103_info->has_dual_banks) {
+ if (optionbyte >> FMC_OBSTAT_BB & 1)
+ command_print(CMD, "Boot: Bank 0");
+ else
+ command_print(CMD, "Boot: Bank 1");
+ }
+
+ command_print(CMD, "User Option0: 0x%02" PRIx8,
+ (uint8_t)((user_data >>
gd32vf103_info->user_data_offset) & 0xff));
+ command_print(CMD, "User Option1: 0x%02" PRIx8,
+ (uint8_t)((user_data >>
(gd32vf103_info->user_data_offset + 8)) & 0xff));
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(gd32vf103_handle_options_write_command)
+{
+ struct target *target = NULL;
+ struct gd32vf103_flash_bank *gd32vf103_info = NULL;
+ uint16_t optionbyte;
+
+ if (CMD_ARGC < 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ gd32vf103_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ retval = gd32vf103_check_operation_supported(bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ retval = gd32vf103_read_options(bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ /* start with current options */
+ optionbyte = gd32vf103_info->option_bytes.user_options;
+
+ /* skip over flash bank */
+ CMD_ARGC--;
+ CMD_ARGV++;
+
+ while (CMD_ARGC) {
+ if (strcmp("SWWDG", CMD_ARGV[0]) == 0)
+ optionbyte |= (1 << 0);
+ else if (strcmp("HWWDG", CMD_ARGV[0]) == 0)
+ optionbyte &= ~(1 << 0);
+ else if (strcmp("NORSTSTOP", CMD_ARGV[0]) == 0)
+ optionbyte |= (1 << 1);
+ else if (strcmp("RSTSTOP", CMD_ARGV[0]) == 0)
+ optionbyte &= ~(1 << 1);
+ else if (strcmp("NORSTSTNDBY", CMD_ARGV[0]) == 0)
+ optionbyte |= (1 << 2);
+ else if (strcmp("RSTSTNDBY", CMD_ARGV[0]) == 0)
+ optionbyte &= ~(1 << 2);
+ else if (gd32vf103_info->has_dual_banks) {
+ if (strcmp("BOOT0", CMD_ARGV[0]) == 0)
+ optionbyte |= (1 << 3);
+ else if (strcmp("BOOT1", CMD_ARGV[0]) == 0)
+ optionbyte &= ~(1 << 3);
+ else
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ } else
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ CMD_ARGC--;
+ CMD_ARGV++;
+ }
+
+ if (gd32vf103_erase_options(bank) != ERROR_OK) {
+ command_print(CMD, "gd32vf103 failed to erase options");
+ return ERROR_OK;
+ }
+
+ gd32vf103_info->option_bytes.user_options = optionbyte;
+
+ if (gd32vf103_write_options(bank) != ERROR_OK) {
+ command_print(CMD, "gd32vf103 failed to write options");
+ return ERROR_OK;
+ }
+
+ command_print(CMD, "gd32vf103 write options complete.\n"
+ "INFO: a reset or power cycle is required "
+ "for the new settings to take effect.");
+
+ return ERROR_OK;
+}
+
+static int gd32vf103_mass_erase(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* unlock option flash registers */
+ int retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_KEY), UNLOCK_KEY0);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_KEY), UNLOCK_KEY1);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* mass erase flash memory */
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_CTL), FMC_CTL_MER);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_CTL),
+ FMC_CTL_MER | FMC_CTL_START);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = gd32vf103_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_write_u32(target, gd32vf103_get_flash_reg(bank,
FMC_CTL), FMC_CTL_LK);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(gd32vf103_handle_mass_erase_command)
+{
+ if (CMD_ARGC < 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ retval = gd32vf103_mass_erase(bank);
+ if (retval == ERROR_OK) {
+ /* set all sectors as erased */
+ for (unsigned i = 0; i < bank->num_sectors; i++)
+ bank->sectors[i].is_erased = 1;
+
+ command_print(CMD, "gd32vf103 mass erase complete");
+ } else
+ command_print(CMD, "gd32vf103 mass erase failed");
+
+ return retval;
+}
+
+static const struct command_registration gd32vf103_exec_command_handlers[] = {
+ {
+ .name = "lock",
+ .handler = gd32vf103_handle_lock_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "Lock entire flash device.",
+ },
+ {
+ .name = "unlock",
+ .handler = gd32vf103_handle_unlock_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "Unlock entire protected flash device.",
+ },
+ {
+ .name = "mass_erase",
+ .handler = gd32vf103_handle_mass_erase_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "Erase entire flash device.",
+ },
+ {
+ .name = "options_read",
+ .handler = gd32vf103_handle_options_read_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "Read and display device option byte.",
+ },
+ {
+ .name = "options_write",
+ .handler = gd32vf103_handle_options_write_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id ('SWWDG'|'HWWDG') "
+ "('RSTSTNDBY'|'NORSTSTNDBY') "
+ "('RSTSTOP'|'NORSTSTOP')",
+ .help = "Replace bits in device option byte.",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration gd32vf103_command_handlers[] = {
+ {
+ .name = "gd32vf103",
+ .mode = COMMAND_ANY,
+ .help = "gd32vf103 flash command group",
+ .usage = "",
+ .chain = gd32vf103_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+struct flash_driver gd32vf103_flash = {
+ .name = "gd32vf103",
+ .commands = gd32vf103_command_handlers,
+ .flash_bank_command = gd32vf103_flash_bank_command,
+ .erase = gd32vf103_erase,
+ .protect = gd32vf103_protect,
+ .write = gd32vf103_write,
+ .read = default_flash_read,
+ .probe = gd32vf103_probe,
+ .auto_probe = gd32vf103_auto_probe,
+ .erase_check = default_flash_blank_check,
+ .protect_check = gd32vf103_protect_check,
+ .info = get_gd32vf103_info,
+ .free_driver_priv = default_flash_free_driver_priv,
+};
--
