- **status**: new --> closed - **Resolution**: --> review.openocd.org/6331 - **Type**: --> bug - **Comment**:
yes, I'm closing it. --- ** [tickets:#308] ST-link connect issue using latest libusb-1.0.dll** **Status:** closed **Milestone:** 0.11.0 **Created:** Fri Jun 11, 2021 10:12 AM UTC by asier70 **Last Updated:** Wed Apr 20, 2022 04:39 PM UTC **Owner:** nobody For years I compile openocd and libusb-1.0 by myself from the newest sources (cross-compilation under ubuntu on Windows 10 for windows 10 x64). I noticed problem with the newest libusb-1.0.dll - I can't connect to st-link (ver. 2.1 and also 3). Log ends with: ~~~ Debug: 46 239 stlink_usb.c:3420 stlink_open(): stlink_open Debug: 47 243 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3744 serial: Debug: 48 248 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3748 serial: Debug: 49 255 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374b serial: Debug: 50 261 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374d serial: Debug: 51 269 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374e serial: Debug: 52 275 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374f serial: Debug: 53 280 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3752 serial: Debug: 54 289 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3753 serial: ~~~ and openocd is exited without any information like "open failed". Connecting to DAP-Link v2 with bulk works. This issue is for latest libusb-1.0.dll version 1.0.24.11627 (and 1.0.24.11623 as I checked). For older version 1.0.24.11608 all works fine: ~~~ Debug: 46 217 stlink_usb.c:3420 stlink_open(): stlink_open Debug: 47 221 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3744 serial: Debug: 48 226 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3748 serial: Debug: 49 234 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374b serial: Debug: 50 240 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374d serial: Debug: 51 246 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374e serial: Debug: 52 254 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374f serial: Debug: 53 260 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3752 serial: Debug: 54 269 stlink_usb.c:3432 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3753 serial: Info : 55 1722 stlink_usb.c:1318 stlink_usb_version(): STLINK V2J37M27 (API v2) VID:PID 0483:3752 Debug: 56 1729 stlink_usb.c:1543 stlink_usb_exit_mode(): MODE: 0x01 ~~~ Any suggestions? --- Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is subscribed to https://sourceforge.net/p/openocd/tickets/ To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list.
