I just upgraded from Ubuntu Server 20.04 to 22.04 so I could install and use
the latest version of openocd.
I now have version 0.11.0 but I am getting a segmentation fault as shown below.
This happens with two boards:
ST Nucleo-F091RC
ST STM32WB Nucleo board
twisthink@nuc-tester-45166:~$ openocd --file
/usr/share/openocd/scripts/board/st_nucleo_f0.cfg
Open On-Chip Debugger 0.11.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results
might differ compared to plain JTAG/SWD
srst_only separate srst_nogate srst_open_drain connect_deassert_srst
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : clock speed 1000 kHz
Segmentation fault (core dumped)
When the board is disconnected, it does not segfault, but fails 'normally' with
Error: open failed
Thanks in advance for any help you can provide.
[cid:image006.png@01D8566F.E7E39540]
Bob Ensink
Team Lead - Principal Software Engineer
[cid:image003.png@01D8566E.A9580960] M: 616.634.7153
[cid:image004.png@01D8566E.A9580960]
b...@twisthink.com<mailto:b...@twisthink.com>
[cid:image005.png@01D8566E.A9580960] twisthink.com<https://twisthink.com/>
This message and its contents are confidential and proprietary.
