Looks like the nrf52 device is not properly connected or is locked. See UICR APPROTECT in ref man. Recent OpenOCD versions support unlocking by the command 'nrf52_recover'. This command cannot be used with a high level adapter, use -f interface/stlink-dap.cfg for ST-Link.
Next time please attach full log or even better full debug log (-d), not just a fragment. --- ** [tickets:#358] Cannot program nrf52833 chip.** **Status:** new **Milestone:** 0.11.0 **Created:** Sun Jul 24, 2022 06:21 PM UTC by jief **Last Updated:** Sun Jul 24, 2022 06:21 PM UTC **Owner:** nobody Cannot program nrf52833 chip. Always got : Info : STLINK V2J27S6 (API v2) VID:PID 0483:3748 Info : Target voltage: 3.239683 Error: [nrf52.cpu] Cortex-M PARTNO 0x0 is unrecognized Warn : target nrf52.cpu examination failed --- Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is subscribed to https://sourceforge.net/p/openocd/tickets/ To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list.