Dear Sir/mam, Please find the bug report I am getting, your help is required to solve it.
Open On-Chip Debugger 0.12.0-rc1+dev-00061-g5e9b46d77 (2022-10-20-14:50) [ https://github.com/STMicroelectronics/OpenOCD] Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html swv Info : Listening on port 6666 for tcl connections Info : Listening on port 4444 for telnet connections Info : STLINK V3J10M3 (API v3) VID:PID 0483:374E Info : Target voltage: 3.288477 Info : clock speed 8000 kHz Info : stlink_dap_op_connect(connect) Info : SWD DPIDR 0x6ba02477 Info : [STM32H7A3ZITxQ.cm7] Cortex-M7 r1p1 processor detected Info : [STM32H7A3ZITxQ.cm7] target has 8 breakpoints, 4 watchpoints Info : gdb port disabled Info : starting gdb server for STM32H7A3ZITxQ.cm7 on 3333 Info : Listening on port 3333 for gdb connections Info : [STM32H7A3ZITxQ.cm7] external reset detected Info : accepting 'gdb' connection on tcp/3333 [STM32H7A3ZITxQ.cm7] halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x08000b28 msp: 0x24100000 Info : Device: STM32H7Ax/7Bx Info : flash size probed value 2048k Info : STM32H7 flash has dual banks Info : Bank (0) size is 1024 kb, base address is 0x08000000 Info : Device: STM32H7Ax/7Bx Info : flash size probed value 2048k Info : STM32H7 flash has dual banks Info : Bank (1) size is 1024 kb, base address is 0x08100000 Info : New GDB Connection: 1, Target STM32H7A3ZITxQ.cm7, state: halted Info : accepting 'gdb' connection on tcp/3333 Info : New GDB Connection: 2, Target STM32H7A3ZITxQ.cm7, state: halted Info : starting trace server for STM32H7A3ZITxQ.swo on 3344 Info : Listening on port 3344 for tpiu_swo_trace connections Info : accepting 'tpiu_swo_trace' connection on tcp/3344 [STM32H7A3ZITxQ.cm7] halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x08000b28 msp: 0x24100000 Info : Padding image section 0 at 0x080002ac with 4 bytes Info : Padding image section 1 at 0x0800a968 with 8 bytes (bank write end alignment) [STM32H7A3ZITxQ.cm7] halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x08000b28 msp: 0x24100000 Info : dropped 'gdb' connection [STM32H7A3ZITxQ.cm7] halted due to debug-request, current mode: Thread xPSR: 0x61000000 pc: 0x08006c00 msp: 0x240fff28 Info : dropped 'gdb' connection shutdown command invoked
