---
** [tickets:#384] Error in interface/raspberrypi-native.cfg**
**Status:** new
**Milestone:** 0.11.0
**Created:** Tue Feb 28, 2023 07:11 PM UTC by Tomáš Deingruber
**Last Updated:** Tue Feb 28, 2023 07:11 PM UTC
**Owner:** nobody
Hi,
I am trying to use OpenOCD on RPi 3B+.
In openocd.cfg immediately on the line with:
~~~
source [find interface/raspberrypi2-native.cfg]
~~~
I do get the following error:
~~~
Open On-Chip Debugger 0.12.0+dev-00077-g0a20e78b7 (2023-02-28-16:48)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
WARNING: interface/raspberrypi2-native.cfg is deprecated.
WARNING: Please use interface/raspberrypi-native.cfg for all Raspberry Pi
models.
/usr/local/bin/../share/openocd/scripts/interface/raspberrypi-native.cfg:71:
Error: couldn't read file "raspberrypi-gpio-connector.cfg": No such file or
directory
in procedure 'script'
at file "embedded:startup.tcl", line 28
at file "openocd.cfg", line 3
at file
"/usr/local/bin/../share/openocd/scripts/interface/raspberrypi2-native.cfg",
line 6
at file
"/usr/local/bin/../share/openocd/scripts/interface/raspberrypi-native.cfg",
line 71
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Warn : An adapter speed is not selected in the init scripts. OpenOCD will try
to run the adapter at very low speed (100 kHz).
Warn : To remove this warnings and achieve reasonable communication speed with
the target, set "adapter speed" or "jtag_rclk" in the init scripts.
Info : BCM2835 GPIO JTAG/SWD bitbang driver
Info : clock speed 100 kHz
Error: session transport was not selected. Use 'transport select <transport>'
Error: Transports available:
Error: jtag
Error: swd
/usr/local/bin/../share/openocd/scripts/interface/raspberrypi-native.cfg:71:
Error:
in procedure 'script'
at file "embedded:startup.tcl", line 28
at file "openocd.cfg", line 3
at file
"/usr/local/bin/../share/openocd/scripts/interface/raspberrypi2-native.cfg",
line 6
at file
"/usr/local/bin/../share/openocd/scripts/interface/raspberrypi-native.cfg",
line 71
/usr/local/bin/../share/openocd/scripts/interface/raspberrypi-native.cfg:71:
Error:
in procedure 'script'
at file "embedded:startup.tcl", line 28
at file "openocd.cfg", line 3
at file
"/usr/local/bin/../share/openocd/scripts/interface/raspberrypi2-native.cfg",
line 6
at file
"/usr/local/bin/../share/openocd/scripts/interface/raspberrypi-native.cfg",
line 71
~~~
And I noticed that at the end of the "interface/raspberrypi-native.cfg" seems
to be an error:
~~~
source raspberrypi-gpio-connector.cfg
~~~
Instead of:
~~~
source [find interface/raspberrypi-gpio-connector.cfg]
~~~
A side note. It seems that I am running the master branch. Am I supposed to
compile a tagged version? e.g. 0.11?
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
