Thanks, that worked indeed. Is that line necessary for anything? It would be great to get this patch into the next release, as it seems to be working with that line commented out.
--- **[tickets:#398] Status of STM fork and adding support for new STM32 silicon** **Status:** new **Milestone:** 0.11.0 **Created:** Wed May 31, 2023 11:05 AM UTC by Jan Henke **Last Updated:** Mon Jul 24, 2023 07:03 PM UTC **Owner:** nobody Hi, I have purchased a STM32WBA52CG nucelo board and noticed OpenOCD does not yet has support for these newer chips STM released in the last months (they released several new series). I stumbled across a fork of OpenOCD created by STM: https://github.com/STMicroelectronics/OpenOCD They have added support for the STM32WBA family to that fork's flash driver along with some other of the new chips (but unfortunately no target config file yet). So I have two questions: 1. What is the status of that fork? Was there any discussion between STM32 and the OpenOCD project in that regard? With OpenOCD being GPL-2 licenced I would assume it is no problem to just cherry picks the relevant commits from that fork back to main OpenOCD? 2. I am struggling with creating a working target config file for the STM32WBA chip. The support was added to the STM32L4x flash driver (which already supports several STM32 families). Is it enough to copy the existing STM32l4x target config and updating the JTAG and SWD values with the correct ones from the STM32WBA reference manual? Best regards Jan Henke --- Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is subscribed to https://sourceforge.net/p/openocd/tickets/ To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list.
