[PATCH]: 330011b756 flash/nor/stm32h7x: Remove redundant error messages

[gerrit]

This is an automated email from Gerrit.

"zapb <d...@zapb.de>" just uploaded a new patch set to Gerrit, which you can 
find at https://review.openocd.org/c/openocd/+/8000

-- gerrit

commit 330011b756d4173c36357e78c393326a41033c26
Author: Marc Schink <d...@zapb.de>
Date:   Sat Nov 11 10:18:53 2023 +0100

    flash/nor/stm32h7x: Remove redundant error messages
    
    The correct syntax is already suggested due to the return
    value used.
    
    Change-Id: Idf3d7a46ddecd70823e06bc3997f41fcdb8e501f
    Signed-off-by: Marc Schink <d...@zapb.de>

diff --git a/src/flash/nor/stm32h7x.c b/src/flash/nor/stm32h7x.c
index 21618b39b8..7bdd286e56 100644
--- a/src/flash/nor/stm32h7x.c
+++ b/src/flash/nor/stm32h7x.c
@@ -1080,10 +1080,8 @@ flash_lock:
 
 COMMAND_HANDLER(stm32x_handle_mass_erase_command)
 {
-       if (CMD_ARGC < 1) {
-               command_print(CMD, "stm32h7x mass_erase <bank>");
+       if (CMD_ARGC < 1)
                return ERROR_COMMAND_SYNTAX_ERROR;
-       }
 
        struct flash_bank *bank;
        int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
@@ -1101,10 +1099,8 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command)
 
 COMMAND_HANDLER(stm32x_handle_option_read_command)
 {
-       if (CMD_ARGC < 2) {
-               command_print(CMD, "stm32h7x option_read <bank> <option_reg 
offset>");
+       if (CMD_ARGC < 2)
                return ERROR_COMMAND_SYNTAX_ERROR;
-       }
 
        struct flash_bank *bank;
        int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
@@ -1126,10 +1122,8 @@ COMMAND_HANDLER(stm32x_handle_option_read_command)
 
 COMMAND_HANDLER(stm32x_handle_option_write_command)
 {
-       if (CMD_ARGC < 3) {
-               command_print(CMD, "stm32h7x option_write <bank> <option_reg 
offset> <value> [mask]");
+       if (CMD_ARGC < 3)
                return ERROR_COMMAND_SYNTAX_ERROR;
-       }
 
        struct flash_bank *bank;
        int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);

--