[PATCH]: d76194647d zynq_7000.cfg: Fix issue 'Error: can't read "zynq_pl": no such variable'

[gerrit]

This is an automated email from Gerrit.

"Dominik Wernberger <dominik.wernber...@gmx.de>" just uploaded a new patch set 
to Gerrit, which you can find at https://review.openocd.org/c/openocd/+/8190

-- gerrit

commit d76194647d5b253ab72fea6ea410cb0dea42dd16
Author: Dominik Wernberger <dominik.wernber...@gmx.de>
Date:   Tue Mar 26 20:32:22 2024 +0100

    zynq_7000.cfg: Fix issue 'Error: can't read "zynq_pl": no such variable'
    
    Change-Id: Ic79ce114b60d0707a6e082a81743b378b164b4e2
    Signed-off-by: Dominik Wernberger <dominik.wernber...@gmx.de>

diff --git a/tcl/target/zynq_7000.cfg b/tcl/target/zynq_7000.cfg
index f5b4478ffc..5a88b6e9d5 100644
--- a/tcl/target/zynq_7000.cfg
+++ b/tcl/target/zynq_7000.cfg
@@ -47,7 +47,7 @@ ${_TARGETNAME}0 configure -event reset-assert-post "cortex_a 
dbginit"
 ${_TARGETNAME}1 configure -event reset-assert-post "cortex_a dbginit"
 
 pld create zynq_pl.pld virtex2 -chain-position zynq_pl.bs -no_jstart
-virtex2 set_user_codes $zynq_pl.pld 0x02 0x03 0x22 0x23
+virtex2 set_user_codes zynq_pl.pld 0x02 0x03 0x22 0x23
 
 set XC7_JSHUTDOWN 0x0d
 set XC7_JPROGRAM 0x0b

--