This is an automated email from Gerrit.
"zapb <d...@zapb.de>" just uploaded a new patch set to Gerrit, which you can
find at https://review.openocd.org/c/openocd/+/8299
-- gerrit
commit 5bb9894c0d4916461da00457d71b52bfb7b8efc2
Author: Marc Schink <d...@zapb.de>
Date: Sat May 25 18:57:10 2024 +0200
tcl/board: Add config for NXP FRDM-KV31F
Change-Id: I4d7cd1bcadd8159e4830107c2788708aef02add0
Signed-off-by: Marc Schink <d...@zapb.de>
diff --git a/tcl/board/nxp/frdm-kv31f-jlink.cfg
b/tcl/board/nxp/frdm-kv31f-jlink.cfg
new file mode 100644
index 0000000000..e55a01cd70
--- /dev/null
+++ b/tcl/board/nxp/frdm-kv31f-jlink.cfg
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# Configuration file for NXP FRDM-KV31F development boards.
+#
+# This configuration file is only for FRDM-KV31F development boards with the
+# SEGGER J-Link OpenSDA firmware, see:
+#
https://www.segger.com/products/debug-probes/j-link/models/other-j-links/opensda-sda-v2/
+
+source [find interface/jlink.cfg]
+
+# Set working area size to 32 KiB.
+set WORKAREASIZE 0x8000
+
+# Set the chip name.
+set CHIPNAME kv31f
+
+transport select swd
+
+source [find target/kx.cfg]
+
+reset_config srst_only
--
