Hi, This doesn't look like a bug.
On Sun, Sep 22, 2024 at 05:14:23AM -0000, navysummer wrote: > Error: The specified debug interface was not found (hla)， ... > source [find interface/stlink.cfg] > source [find target/stm32f1x.cfg] > openocd version：0.12.0+dev-01703-ge09bb72da Looks like you configured the binary without having libusb-1.0 development files, please install them and re-run configure and make. > os：linux Linux is the name of the kernel. Your OS might be a variant of GNU/Linux. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:fercer...@gmail.com --- **[tickets:#433] Cannot burn program using openocd** **Status:** new **Milestone:** 0.10.0 **Created:** Sun Sep 22, 2024 05:14 AM UTC by navysummer **Last Updated:** Sun Sep 22, 2024 05:14 AM UTC **Owner:** nobody Error: The specified debug interface was not found (hla)， command： /usr/local/bin/openocd -s /usr/local/share/openocd/scripts -f ./openocd.cfg -c "program target/thumbv7m-none-eabi/debug/led preverify verify reset exit" openocd.cfg： source [find interface/stlink.cfg] source [find target/stm32f1x.cfg] openocd version：0.12.0+dev-01703-ge09bb72da os：linux chip:stm32f103 --- Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is subscribed to https://sourceforge.net/p/openocd/tickets/ To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list.
