Hi Marc, Ready, willing and able. I have a couple of 415 and 435 Goteks I can try it with.
Regards Andy On Tue, 19 Nov 2024 at 08:48, Marc Schink <d...@zapb.de> wrote: > Hi Andy, > > just to let you know, I have a working driver for the ArteryTek AT32F4x > series. It just needs some code cleanup. I hope I can push it soon on > Gerrit. Would be nice if you can give it a try then. > > Best regards, > Marc > > On Mon, 2024-11-18 at 22:32 +0000, Andy Potter wrote: > > I am trying to do the same with Artery as I want to talk to their > > AT32F4xx chips and they have posted copies of their versions of > > OpenOCD, both 0.10.0 and 0.11.0 within some of their Application > > Notes (AN0033, AN0130, AN0186, AN0191 and AN0193 to name a few) > > without access to the varying sources they were built with. I have > > used their contact form to request the required sources as per the > > terms of the GPL but as I am not a copyright holder of any of the > > code my options are limited. Is there a copyright holder who could > > give them a gentle push/probe? > > [tickets:#439] OpenOCD failed with code (-1073741819) > > Status: new > > Milestone: 0.10.0 > > Labels: OpenOCD > > Created: Fri Oct 11, 2024 02:23 PM UTC by Alex > > Last Updated: Sat Oct 12, 2024 07:48 PM UTC > > Owner: nobody > > Attachments: > > * image_2024_10_11T13_44_15_984Z.png (44.5 kB; image/png) > > Trying to use Microchip SoftConsole 2022 on PolarFire SoC Icicle Kit > > to debug example application, but OpenOCD failing with message: > > OpenOCD failed with code (-1073741819). We tried to Google but > > nothing comes up. Could you tell us what that error code means? > > It is a new DELL laptop running Windows 11. We use SoftConsole on > > other 4 PCs and no problems. The interesting part that OpenOCD > > detects two Embedded FlashPro6 as shown on attached image and we did > > not see that before. > > Thank you > > Sent from sourceforge.net because openocd-devel@lists.sourceforge.net > > is subscribed to https://sourceforge.net/p/openocd/tickets/ > > To unsubscribe from further messages, a project admin can change > > settings at https://sourceforge.net/p/openocd/admin/tickets/options. > > Or, if this is a mailing list, you can unsubscribe from the mailing > > list. > > >
