[PATCH]: 3c9f4cce29 flash: at91sam7: align format strings to types

[gerrit]

This is an automated email from Gerrit.

"Antonio Borneo <borneo.anto...@gmail.com>" just uploaded a new patch set to 
Gerrit, which you can find at https://review.openocd.org/c/openocd/+/9066

-- gerrit

commit 3c9f4cce29490060fc3ee4400502baaf7c8d37be
Author: Antonio Borneo <borneo.anto...@gmail.com>
Date:   Fri Aug 1 17:28:40 2025 +0200

    flash: at91sam7: align format strings to types
    
    Remove the cast and use the correct conversion specifier.
    
    Change-Id: Idd9fae8cb8858e1f2f098544eb2eaa80bf0c5597
    Signed-off-by: Antonio Borneo <borneo.anto...@gmail.com>

diff --git a/src/flash/nor/at91sam7.c b/src/flash/nor/at91sam7.c
index a124e49df2..093f7ea3e3 100644
--- a/src/flash/nor/at91sam7.c
+++ b/src/flash/nor/at91sam7.c
@@ -277,7 +277,7 @@ static void at91sam7_set_flash_mode(struct flash_bank 
*bank, int mode)
                if (at91sam7_info->mck_freq > 30000000ul)
                        fws = 1;
 
-               LOG_DEBUG("fmcn[%i]: %i", bank->bank_number, (int)(fmcn));
+               LOG_DEBUG("fmcn[%u]: %" PRIu32, bank->bank_number, fmcn);
                fmr = fmcn << 16 | fws << 8;
                target_write_u32(target, mc_fmr[bank->bank_number], fmr);
        }
@@ -291,11 +291,11 @@ static uint32_t at91sam7_wait_status_busy(struct 
flash_bank *bank, uint32_t wait
 
        while ((!((status = at91sam7_get_flash_status(bank->target,
                        bank->bank_number)) & waitbits)) && (timeout-- > 0)) {
-               LOG_DEBUG("status[%i]: 0x%" PRIx32, (int)bank->bank_number, 
status);
+               LOG_DEBUG("status[%u]: 0x%" PRIx32, bank->bank_number, status);
                alive_sleep(1);
        }
 
-       LOG_DEBUG("status[%i]: 0x%" PRIx32, bank->bank_number, status);
+       LOG_DEBUG("status[%u]: 0x%" PRIx32, bank->bank_number, status);
 
        if (status & 0x0C) {
                LOG_ERROR("status register: 0x%" PRIx32, status);
@@ -319,7 +319,7 @@ static int at91sam7_flash_command(struct flash_bank *bank, 
uint8_t cmd, uint16_t
 
        fcr = (0x5A << 24) | ((pagen&0x3FF) << 8) | cmd;
        target_write_u32(target, mc_fcr[bank->bank_number], fcr);
-       LOG_DEBUG("Flash command: 0x%" PRIx32 ", flash bank: %i, page number: 
%u",
+       LOG_DEBUG("Flash command: 0x%" PRIx32 ", flash bank: %u, page number: 
%" PRIu16,
                fcr,
                bank->bank_number + 1,
                pagen);

--