First thing to do in such circumstances is usually to collect and upload a verbose `openocd -d3` log for analysis. It will usually shed a bit more light on the cause of the problem. If necessary, read the OpenOCD user documentation to see how to collect such a log.
--- **[tickets:#460] Arduino IDE 0xc0000005** **Status:** new **Milestone:** 0.11.0 **Created:** Wed Oct 01, 2025 07:00 PM UTC by Yannick Blendermann **Last Updated:** Wed Oct 01, 2025 07:00 PM UTC **Owner:** nobody **Attachments:** - [1.png](https://sourceforge.net/p/openocd/tickets/460/attachment/1.png) (20.4 kB; image/png) Hello, i have an error while trying to upload a simple sketch to an arduino nicla sense me via the arduino ide. I have a fresh install of the ide an all nessasary board packages installed. I have contacted the arduino support first, but they couldn't give me any solution for the problem. Do you have any ida how to resolve this? --- Sent from sourceforge.net because [email protected] is subscribed to https://sourceforge.net/p/openocd/tickets/ To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list.
