This is an automated email from Gerrit. "João Lima <[email protected]>" just uploaded a new patch set to Gerrit, which you can find at https://review.openocd.org/c/openocd/+/9020
-- gerrit commit 1d07f3f3e5063b3dfd000f2e53a40748b6b0a2b5 Author: Joao Lima <[email protected]> Date: Tue Sep 30 12:13:04 2025 +0000 tcl/board/ti_*_swd_native.cfg: Add support for direct memory access via SW Add support for SWD emulation as a transport method for direct memory operations of boards TI AM64x and TI J784s4 Change-Id: I17fe9b2bef5c58886625bfdb88d92645ba4d7da7 Signed-off-by: Joao Lima <[email protected]> diff --git a/tcl/board/ti_am64xx_swd_native.cfg b/tcl/board/ti_am64xx_swd_native.cfg new file mode 100644 index 0000000000..d3727149ec --- /dev/null +++ b/tcl/board/ti_am64xx_swd_native.cfg @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (C) 2022-2023 Texas Instruments Incorporated - http://www.ti.com/ +# +# Texas Instruments am642 +# Link: https://www.ti.com/product/AM642 +# +# This configuration file is used as a self hosted debug configuration that +# works on every AM642 platform based on firewall configuration permitted +# in the system. +# +# In this system openOCD runs on one of the CPUs inside AM625 and provides +# network ports that can then be used to debug the microcontrollers on the +# SoC - either self hosted IDE OR remotely. + +# We are using dmem, which uses dapdirect_swd transport +adapter driver dmem +transport select swd + +if { ![info exists SOC] } { + set SOC am642 +} + +source [find target/ti_k3.cfg] diff --git a/tcl/board/ti_j784s4_swd_native.cfg b/tcl/board/ti_j784s4_swd_native.cfg new file mode 100644 index 0000000000..13b2ac3b87 --- /dev/null +++ b/tcl/board/ti_j784s4_swd_native.cfg @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (C) 2022-2023 Texas Instruments Incorporated - http://www.ti.com/ +# +# Texas Instruments TDA4VM/J721E +# Link: https://www.ti.com/product/TDA4VM +# +# This configuration file is used as a self hosted debug configuration that +# works on every TDA4VM platform based on firewall configuration permitted +# in the system. +# +# In this system openOCD runs on one of the CPUs inside TDA4VM and provides +# network ports that can then be used to debug the microcontrollers on the +# SoC - either self hosted IDE OR remotely. + +# We are using dmem, which uses dapdirect_swd transport +adapter driver dmem +transport select swd + +if { ![info exists SOC] } { + set SOC j784s4 +} +source [find target/ti_k3.cfg] --
