Committed. The reset routine now works w/LPC2148 out of the box.
Index: C:/workspace/openocd/src/target/target/lpc2148.cfg =================================================================== --- C:/workspace/openocd/src/target/target/lpc2148.cfg (revision 884) +++ C:/workspace/openocd/src/target/target/lpc2148.cfg (working copy) @@ -2,22 +2,19 @@ jtag_nsrst_delay 200 jtag_ntrst_delay 200 +# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate +# JTAG, power-on reset is not enough, i.e. you need to perform a +# reset before being able to talk to the LPC2148, attach is not +# possible. + #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst srst_pulls_trst -#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough -jtag_reset 1 1 -jtag_reset 0 0 - #jtag scan chain -#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> target arm7tdmi little 0 arm7tdmi-s_r4 - target_script 0 reset event/lpc2148_reset.script working_area 0 0x40000000 0x4000 nobackup @@ -24,6 +21,3 @@ #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 - -# For more information about the configuration files, take a look at: -# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger -- Øyvind Harboe http://www.zylin.com/zy1000.html ARM7 ARM9 XScale Cortex JTAG debugger and flash programmer _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
