On Tue, Oct 14, 2008 at 12:01 PM, Alexei Babich <[EMAIL PROTECTED]> wrote:
> In the section 4.2:
> "jtag nsrst delay <ms > How long (in milliseconds) OpenOCD should wait
> after deasserting nSRST before starting new JTAG operations."
Clarified & commited:
### Eclipse Workspace Patch 1.0
#P openocd
Index: doc/openocd.texi
===================================================================
--- doc/openocd.texi (revision 1055)
+++ doc/openocd.texi (working copy)
@@ -415,8 +415,7 @@
starting new JTAG operations.
@item @b{jtag_ntrst_delay} <@var{ms}>
@cindex jtag_ntrst_delay
-How long (in milliseconds) OpenOCD should wait after deasserting nTRST before
-starting new JTAG operations.
+Same @b{jtag_nsrst_delay}, but for nTRST
The jtag_n[st]rst_delay options are useful if reset circuitry (like a
reset supervisor,
or on-chip features) keep a reset line asserted for some time after
the external reset
--
Øyvind Harboe
http://www.zylin.com/zy1000.html
ARM7 ARM9 XScale Cortex
JTAG debugger and flash programmer
Free eCos workshop in Oslo October 21!
http://www.zylin.com/workshop.html
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
