> I would first check the board schematic and make sure all the JTAG lines are > hooked up appropriately and have correct pull-up/downs where necessary. > From there, you would need someone more familiar with the ARM7/9 JTAG > commands to figure out what it is trying to do.
Well, the pins are properly pulled high and low. Is it possible that the device ID is correctly read while the hardware is faulty? The wiggler cable is good since I tested it with another board with a different CPU. -- brian ------------------ Cool-Karaoke - The smallest recording studio, in your palm, open-sourced http://cool-idea.com.tw/xoops/ck-product.php iMaGiNaTiOn iS mOrE iMpOrTaNt tHaN kNoWlEdGe _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
