Hello!
I was finally able to program the flash of the Hammer target using the
flyswatter. The problem was related to a couple of typos on the
hammer.cfg config file. Please, find attached the svn diff against trunk
that fixes the problem.
Thanks!
Carlos Antunes
Index: src/target/target/hammer.cfg
===================================================================
--- src/target/target/hammer.cfg (revision 1187)
+++ src/target/target/hammer.cfg (working copy)
@@ -10,7 +10,7 @@
target create target0 arm920t -endian little -chain-position 0 -variant
arm920t
-[new_target_name] configure -work-area-virt 0 -work-area-phys
0x40800000 -work-area-size 0x20000 -work-area-backup 0
+[new_target_name] configure -work-area-virt 0 -work-area-phys
0x30800000 -work-area-size 0x20000 -work-area-backup 0
[new_target_name] configure -event reset-init {
# Reset Script for the TinCanTools S3C2410 Based Hammer Module
# http://www.tincantools.com
@@ -39,7 +39,7 @@
}
# speed up memory downloads
-arm7 fast_memory_access enable
+arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable
#flash configuration
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
