On Dec 17, 2008, at 1:36 PM, [email protected] wrote:
I saw this thread in the archives, but wasn't subscribed at the time, soI cannot reply directly. https://lists.berlios.de/pipermail/openocd-development/2008-November/003742.html It has come to my attention that the STM32 Primer2, while it uses the same RLink chip that the STM32 Primer does, doesn't use JTAG. It uses SWD, exclusively. The pins that would be TDI and TDO are used for the audio CODEC, and not connected to the RLink chip.I don't have a Primer2 yet, and probably won't purchase one until it willbe possible to support it, which will require SWD. Still, the patch I've submitted works just fine with the Primer. _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
SWD is definitely a post-1.0 priority. -- Rick Altherr [email protected]"He said he hadn't had a byte in three days. I had a short, so I split it with him."
-- Unsigned
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
