Dirk Behme a écrit : > Now that I'm able to easily build with libftdi and libftd2xx, I tried > libftd2xx (libftd2xx0.4.16.tar.gz), too. > > While libftdi works fine, with libftd2xx I get: > > -- cut -- > ... > Debug: 58 3 ft2232.c:1412 ft2232_init_ftd2xx(): 'ft2232' interface > using FTD2XX with 'flyswatter' layout (0403:6010) > Error: 59 4 ft2232.c:1455 ft2232_init_ftd2xx(): unable to open ftdi > device: 2 > Error: 60 11 ft2232.c:1470 ft2232_init_ftd2xx(): ListDevices: 0 > -- cut -- > > Any idea what might be wrong here? Just in case somebody has a better > idea than "use open source an no binary driver" ;) > > Thanks > > Dirk > > P.S.: This is with recent SVN 1293. > > Working libftdi output: > > Debug: 58 3 ft2232.c:1537 ft2232_init_libftdi(): 'ft2232' interface > using libftdi with 'flyswatter' layout (0403:6010) > Debug: 59 23 ft2232.c:1579 ft2232_init_libftdi(): current latency timer: 2 > Debug: 60 24 ft2232.c:1981 flyswatter_init(): 80 18 fb > Debug: 61 25 ft2232.c:2004 flyswatter_init(): 82 08 0c > Debug: 62 26 ft2232.c:259 ft2232_speed(): 86 01 00 > Debug: 63 30 openocd.c:158 handle_init_command(): jtag interface init > complete > > I get similar results with Olimex Tiny dongle if I run openocd from user. I have to either run sudo, root or make a chmod a+s on openocd.
Michel -- Tired of Microsoft's rebootive multitasking? then it's time to upgrade to Linux. http://home.comcast.net/~mcatudal _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
