Spencer Oliver pisze: > The issue is that the rlink uses a slightly unique driver (forget the name)
Jungo (; BTW it's the same driver as AVR ISP MkII (STK500v2) uses. > you have to remove the standard rlink driver and use the main libusb driver. > > I have attached the inf for a standard rlink - if this does not match the > primer than use inf-wizard.exe (part of libusb) to generate the correct inf > file. the driver you attached solved the problem in no time (; i was able to connect to rlink and to the target, erase the chip, upload some image to the flash and execute some openocd commands via telnet session. thank you very much. maybe tomorrow i'll manage to get eclipse compile sth for cortex and try some debugging - i hope there will be no troubles more on my way (; > The downside of all this is that you cannot use RIDE and openocd at the same > time. nah, that's not a problem, as RIDE (IMHO) is not very good [; eclipse + all other necessary files is much better and - most of all - free. thx again for thy help! 4\/3!! _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
