I have one concern regarding the configuration files for the
AT91SAM9260. There's an AT91SAM9260minimal.cfg that should be
AT91SAM9260.cfg and the current AT91SAM9260.cfg should be a board file.
I submitted a patch to the list to fix this the other night, but it
might be worth having it added to this release.
Tested build on Fedora 10 using following commands:
libftdi:
./configure --enable-parport --enable-parport_ppdev
--enable-ft2232_libftdi --enable-ep93xx --enable-at91rm9200
--enable-usbprog --enable-presto_libftdi --enable-jlink --enable-vsllink
--enable-rlink --enable-dummy --enable-gw16012 --enable-amtjtagaccel
--prefix=$HOME/tools/openocd-0.1.0/
make all install
libftd2xx:
./configure --enable-parport --enable-parport_ppdev
--enable-ft2232_ftd2xx --enable-ep93xx --enable-at91rm9200
--enable-usbprog --enable-presto_libftdi --enable-jlink --enable-vsllink
--enable-rlink --enable-dummy --enable-gw16012 --enable-amtjtagaccel
--prefix=$HOME/tools/openocd-0.1.0/
make all install
Both have successful build and run, but I am only able to verify that
the libftdi version works to some extent with my JTAG device and board.
I'm having issues with the ftd2xx driver, so it isn't OpenOCD. Man
pages appear to be in place.
// Dean Glazeski
Rick Altherr wrote:
I've put an updated tarball up at
http://www.kc8apf.net/files/openocd-0.1.0.tar.gz. This version
incorporates the manual page installation fix and should also fix a
bug in guess-rev.sh. Please give it a spin on Linux, FreeBSD, Windows
and report back on compilation success or failure.
Thanks,
--
Rick Altherr
[email protected]
"He said he hadn't had a byte in three days. I had a short, so I split
it with him."
-- Unsigned
------------------------------------------------------------------------
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
