Hi guys,
I have an sam7s64-ek board with r1411 of openocd and gdb-6.8. I am using
arm-elf binutils-2.19, gcc-4.3.3, newlib-1.17.0. I'm new to openocd and gdb so
if this post doesn't belong to this list. Please kindly point me to the right
place.
So here's my first question. from gdb, I loaded my elf with "file demo.elf" and
flash with openocd in gdb with "monitor flash write_address erase demo.elf
0x00100000. I then tried "run" from gdb and it says "Don't know how to run".
Did I miss anything?
The second one is a little weird. I tried to verify that "load" in gdb actually
wrote my image into the flash. So I did "monitor flash erase_address 0x00100000
0x10000". "x 0x0" shows 0xffffffff. That's a good sign. Then i did "load". "x
0x0" still shows 0xffffffff. The "load" command didn't seem to do anything.
Any ideas?
Cheers,
Kelvin Chan | Positronics Ent.
Product Development |
| unit 272
604-628-9330 (direct) | 8128 128th St.
604-585-2...@104 (main) | Surrey, BC
604-585-3056 (fax) | Canada, V3W 1R1
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
