Hi all,
I want to upgrade my revision 645 openocd to the new 0.1.0. I see that many
things have changed.
I try to get my setup in the same way I had my last one. I would like to be
able to download my application to the flash of the sam7s parts. I Have a
256K flash device.
Here what I have so far in my cfg.
//------------------------
source [find interface/olimex-arm-usb-ocd.cfg]
# Change the default telnet port...
telnet_port 4444
# GDB connects here
gdb_port 3333
# GDB can also flash my flash!
gdb_memory_map enable
gdb_flash_program enable
source [find target/sam7x256.cfg]
# AT91SAM7 flash command-"batch"
wait_halt
arm7_9 dcc_downloads enable
armv4_5 core_state arm
flash probe 0
#flash erase 0 0 0
#flash protect 0 0 2 off
flash write_binary 0 main.bin 0x0
mww 0xfffffd08 0xa5000401
reset
shutdown
//----------------------------
But I got errors on Wait_halt, flash probe 0 and flash write_binary command.
They are not reconized.
//---------------------------
C:\Documents and Settings\dumarjo\Bureau\test_location_code>openocd
Open On-Chip Debugger 0.1.0 (2009-01-21-21:15) Release
BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
$URL: https://[email protected]/svnroot/repos/openocd/tags/openocd
0.1.0/src
/openocd.c $
Runtime error, file "openocd.cfg", line 14:
Unknown command: wait_halt
C:\Documents and Settings\dumarjo\Bureau\test_location_code>
//----------------------------
Is there a sample cfg that I can start with ?
I can connect to the target with telnet with no problem. I can use the flash
info 0 to get the falsh status.
Regards
Jonathan
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
