Add full company name (if any), interface/dongle name, and URL to all interface config files.
Please check the infos, I may not have gotten all of them right. Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
Index: src/target/interface/usbprog.cfg =================================================================== --- src/target/interface/usbprog.cfg (Revision 1438) +++ src/target/interface/usbprog.cfg (Arbeitskopie) @@ -1,7 +1,8 @@ # -# USBprog +# Embedded Projects USBprog # # http://embedded-projects.net/index.php?page_id=135 # interface usbprog + Index: src/target/interface/stm32-stick.cfg =================================================================== --- src/target/interface/stm32-stick.cfg (Revision 1438) +++ src/target/interface/stm32-stick.cfg (Arbeitskopie) @@ -1,5 +1,11 @@ -# ftdi interface +# +# Hitex STM32-PerformanceStick +# +# http://www.hitex.com/index.php?id=340 +# + interface ft2232 ft2232_device_desc "STM32-PerformanceStick A" ft2232_layout stm32stick ft2232_vid_pid 0x0640 0x002d + Index: src/target/interface/calao-usb-a9260-c01.cfg =================================================================== --- src/target/interface/calao-usb-a9260-c01.cfg (Revision 1438) +++ src/target/interface/calao-usb-a9260-c01.cfg (Arbeitskopie) @@ -1,11 +1,13 @@ # -# Calao Systems USB-A9260-C01 +# CALAO Systems USB-A9260-C01 # # http://www.calao-systems.com/ # + interface ft2232 ft2232_layout jtagkey ft2232_device_desc "USB-A9260" ft2232_vid_pid 0x0403 0x6010 script interface/calao-usb-a9260.cfg script target/at91sam9260minimal.cfg + Index: src/target/interface/signalyzer.cfg =================================================================== --- src/target/interface/signalyzer.cfg (Revision 1438) +++ src/target/interface/signalyzer.cfg (Arbeitskopie) @@ -1,5 +1,11 @@ -#interface +# +# Xverve Signalyzer Tool (DT-USB-ST) +# +# http://www.signalyzer.com/products/development-tools/signalyzer-tool-dt-usb-st.html +# + interface ft2232 ft2232_device_desc "Signalyzer A" ft2232_layout signalyzer ft2232_vid_pid 0x0403 0xbca0 + Index: src/target/interface/parport.cfg =================================================================== --- src/target/interface/parport.cfg (Revision 1438) +++ src/target/interface/parport.cfg (Arbeitskopie) @@ -1,3 +1,7 @@ +# +# Parallel port wiggler (many clones available) on port 0xc8b8 +# + interface parport parport_port 0xc8b8 parport_cable wiggler @@ -2 +6,2 @@ jtag_speed 0 + Index: src/target/interface/calao-usb-a9260-c02.cfg =================================================================== --- src/target/interface/calao-usb-a9260-c02.cfg (Revision 1438) +++ src/target/interface/calao-usb-a9260-c02.cfg (Arbeitskopie) @@ -1,11 +1,13 @@ # -# Calao Systems USB-A9260-C02 +# CALAO Systems USB-A9260-C02 # # http://www.calao-systems.com/ # + interface ft2232 ft2232_layout jtagkey ft2232_device_desc "USB-A9260 A" ft2232_vid_pid 0x0403 0x6001 script interface/calao-usb-a9260.cfg script target/at91sam9260minimal.cfg + Index: src/target/interface/at91rm9200.cfg =================================================================== --- src/target/interface/at91rm9200.cfg (Revision 1438) +++ src/target/interface/at91rm9200.cfg (Arbeitskopie) @@ -1,3 +1,9 @@ -#interface +# +# Various Atmel AT91RM9200 boards +# +# TODO: URL? +# + interface at91rm9200 at91rm9200_device rea_ecr + Index: src/target/interface/turtelizer2.cfg =================================================================== --- src/target/interface/turtelizer2.cfg (Revision 1438) +++ src/target/interface/turtelizer2.cfg (Arbeitskopie) @@ -1,5 +1,11 @@ -#interface +# +# egnite Turtelizer 2 +# +# http://www.ethernut.de/en/hardware/turtelizer/index.html +# + interface ft2232 ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A" ft2232_layout turtelizer2 ft2232_vid_pid 0x0403 0xbdc8 + Index: src/target/interface/chameleon.cfg =================================================================== --- src/target/interface/chameleon.cfg (Revision 1438) +++ src/target/interface/chameleon.cfg (Arbeitskopie) @@ -1,4 +1,9 @@ -#interface +# +# Amontec Chameleon POD +# +# http://www.amontec.com/chameleon.shtml +# + interface parport parport_cable chameleon Index: src/target/interface/dummy.cfg =================================================================== --- src/target/interface/dummy.cfg (Revision 1438) +++ src/target/interface/dummy.cfg (Arbeitskopie) @@ -1 +1,6 @@ +# +# Dummy interface (for testing purposes) +# + interface dummy + Index: src/target/interface/parport_dlc5.cfg =================================================================== --- src/target/interface/parport_dlc5.cfg (Revision 1438) +++ src/target/interface/parport_dlc5.cfg (Arbeitskopie) @@ -1,3 +1,9 @@ +# +# Xilinx Parallel Cable III 'DLC 5' (and various clones) +# +# http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html +# + interface parport parport_port /dev/parport0 parport_cable dlc5 @@ -2 +8,2 @@ jtag_speed 0 + Index: src/target/interface/axm0432.cfg =================================================================== --- src/target/interface/axm0432.cfg (Revision 1438) +++ src/target/interface/axm0432.cfg (Arbeitskopie) @@ -1,4 +1,9 @@ -#interface +# +# Axiom axm0432 +# +# http://www.axman.com +# + interface ft2232 ft2232_device_desc "Symphony SoundBite A" ft2232_layout "axm0432_jtag" Index: src/target/interface/jtagkey.cfg =================================================================== --- src/target/interface/jtagkey.cfg (Revision 1438) +++ src/target/interface/jtagkey.cfg (Arbeitskopie) @@ -1,5 +1,11 @@ -#interface +# +# Amontec JTAGkey +# +# http://www.amontec.com/jtagkey.shtml +# + interface ft2232 ft2232_device_desc "Amontec JTAGkey A" ft2232_layout jtagkey ft2232_vid_pid 0x0403 0xcff8 + Index: src/target/interface/luminary.cfg =================================================================== --- src/target/interface/luminary.cfg (Revision 1438) +++ src/target/interface/luminary.cfg (Arbeitskopie) @@ -1,4 +1,9 @@ -# ftdi interface using ftdi driver +# +# Luminary Micro LM3S811 Evaluation Kit(s) +# +# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html +# + interface ft2232 ft2232_device_desc "Stellaris Evaluation Board A" ft2232_layout evb_lm3s811 Index: src/target/interface/olimex-jtag-tiny.cfg =================================================================== --- src/target/interface/olimex-jtag-tiny.cfg (Revision 1438) +++ src/target/interface/olimex-jtag-tiny.cfg (Arbeitskopie) @@ -1,11 +1,15 @@ -## -# Olimex JTAG TINY USB Debugger +# +# Olimex ARM-USB-TINY +# +# http://www.olimex.com/dev/arm-usb-tiny.html +# + +# TODO: FIXME # Linux USB tends to see the device description without the 'A' as in target/olimex-jtag-tiny.cfg, # but Windows still needs the 'A'. This is a replacement for Linux users. -## -# REFERENCE: http://www.olimex.com/dev/arm-usb-tiny.html interface ft2232 ft2232_device_desc "Olimex OpenOCD JTAG TINY" ft2232_layout olimex-jtag ft2232_vid_pid 0x15ba 0x0004 + Index: src/target/interface/sheevaplug.cfg =================================================================== --- src/target/interface/sheevaplug.cfg (Revision 1438) +++ src/target/interface/sheevaplug.cfg (Arbeitskopie) @@ -1,3 +1,9 @@ +# +# Marvel SheevaPlug Development Kit +# +# http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp +# + interface ft2232 ft2232_layout sheevaplug ft2232_vid_pid 0x0403 0x6010 @@ -2 +8,2 @@ jtag_khz 3000 + Index: src/target/interface/flyswatter.cfg =================================================================== --- src/target/interface/flyswatter.cfg (Revision 1438) +++ src/target/interface/flyswatter.cfg (Arbeitskopie) @@ -1,9 +1,12 @@ -# Interface Configuration for the TinCanTools FT2232 Based Flyswatter -# http://www.tincantools.com +# +# TinCanTools Flyswatter +# +# http://www.tincantools.com/product.php?productid=16134 +# -#interface interface ft2232 ft2232_device_desc "Flyswatter" ft2232_layout "flyswatter" ft2232_vid_pid 0x0403 0x6010 jtag_speed 1 + Index: src/target/interface/olimex-arm-usb-ocd.cfg =================================================================== --- src/target/interface/olimex-arm-usb-ocd.cfg (Revision 1438) +++ src/target/interface/olimex-arm-usb-ocd.cfg (Arbeitskopie) @@ -1,3 +1,9 @@ +# +# Olimex ARM-USB-OCD +# +# http://www.olimex.com/dev/arm-usb-ocd.html +# + interface ft2232 ft2232_device_desc "Olimex OpenOCD JTAG" ft2232_layout olimex-jtag @@ -2 +8,2 @@ ft2232_vid_pid 0x15ba 0x0003 + Index: src/target/interface/calao-usb-a9260.cfg =================================================================== --- src/target/interface/calao-usb-a9260.cfg (Revision 1438) +++ src/target/interface/calao-usb-a9260.cfg (Arbeitskopie) @@ -1,14 +1,15 @@ # -# Calao Systems USB-A9260 common -C01 -C02 setup +# CALAO Systems USB-A9260 common -C01 -C02 setup # # http://www.calao-systems.com/ # -# See calao-usb-a9260-c01.cfg and calao-usb-a9260-c02.cfg +# See calao-usb-a9260-c01.cfg and calao-usb-a9260-c02.cfg. # -# note: you must have an openocd version where jtag_speed sets two values -# trunk ver 606 contains the fix for this particular issue which can -# be seen if jtag_speed does not set two separate values +# Note: You must have an OpenOCD version where jtag_speed sets two values. +# trunk r606 contains the fix for this particular issue which can +# be seen if jtag_speed does not set two separate values. # + jtag_speed 1200 0 jtag_nsrst_delay 200 jtag_ntrst_delay 200 Index: src/target/interface/luminary-lm3s811.cfg =================================================================== --- src/target/interface/luminary-lm3s811.cfg (Revision 1438) +++ src/target/interface/luminary-lm3s811.cfg (Arbeitskopie) @@ -1,4 +1,9 @@ -# ftdi interface +# +# Luminary Micro Stellaris LM3S811 Evaluation Kit +# +# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html +# + interface ft2232 ft2232_device_desc "LM3S811 Evaluation Board A" ft2232_layout evb_lm3s811 Index: src/target/interface/jlink.cfg =================================================================== --- src/target/interface/jlink.cfg (Revision 1438) +++ src/target/interface/jlink.cfg (Arbeitskopie) @@ -1,3 +1,8 @@ -# jlink interface +# +# Segger J-Link +# +# http://www.segger.com/jlink.html +# + interface jlink Index: src/target/interface/arm-usb-ocd.cfg =================================================================== --- src/target/interface/arm-usb-ocd.cfg (Revision 1438) +++ src/target/interface/arm-usb-ocd.cfg (Arbeitskopie) @@ -1,5 +1,11 @@ -#interface +# +# Olimex ARM-USB-OCD +# +# http://www.olimex.com/dev/arm-usb-ocd.html +# + interface ft2232 ft2232_device_desc "Olimex OpenOCD JTAG A" ft2232_layout "olimex-jtag" ft2232_vid_pid 0x15BA 0x0003 + Index: src/target/interface/luminary-libftdi.cfg =================================================================== --- src/target/interface/luminary-libftdi.cfg (Revision 1438) +++ src/target/interface/luminary-libftdi.cfg (Arbeitskopie) @@ -1,4 +1,9 @@ -# ftdi interface using libftdi driver +# +# Luminary Micro Stellaris LM3S811 Evaluation Kit +# +# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html +# + interface ft2232 ft2232_device_desc "Stellaris Evaluation Board" ft2232_layout evb_lm3s811 Index: src/target/interface/arm-jtag-ew.cfg =================================================================== --- src/target/interface/arm-jtag-ew.cfg (Revision 1438) +++ src/target/interface/arm-jtag-ew.cfg (Arbeitskopie) @@ -1,2 +1,8 @@ -# Interface ARM-JTAG-EW +# +# Olimex ARM-JTAG-EW +# +# http://www.olimex.com/dev/arm-jtag-ew.html +# + interface arm-jtag-ew + Index: src/target/interface/str9-comstick.cfg =================================================================== --- src/target/interface/str9-comstick.cfg (Revision 1438) +++ src/target/interface/str9-comstick.cfg (Arbeitskopie) @@ -1,3 +1,9 @@ +# +# Hitex STR9-comStick +# +# http://www.hitex.com/index.php?id=383 +# + interface ft2232 ft2232_device_desc "STR9-comStick A" ft2232_layout comstick @@ -2 +8,2 @@ ft2232_vid_pid 0x0640 0x002c + Index: src/target/interface/openocd-usb.cfg =================================================================== --- src/target/interface/openocd-usb.cfg (Revision 1438) +++ src/target/interface/openocd-usb.cfg (Arbeitskopie) @@ -1,4 +1,9 @@ -#interface +# +# Hubert Hoegl's USB to JTAG +# +# http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html +# + interface ft2232 ft2232_vid_pid 0x0403 0x6010 ft2232_device_desc "Dual RS232" Index: src/target/interface/jtagkey-tiny.cfg =================================================================== --- src/target/interface/jtagkey-tiny.cfg (Revision 1438) +++ src/target/interface/jtagkey-tiny.cfg (Arbeitskopie) @@ -1,5 +1,11 @@ -#interface +# +# Amontec JTAGkey-tiny +# +# http://www.amontec.com/jtagkey-tiny.shtml +# + interface ft2232 ft2232_device_desc "Amontec JTAGkey" ft2232_layout jtagkey ft2232_vid_pid 0x0403 0xcff8 + Index: src/target/interface/olimex-jtag-tiny-a.cfg =================================================================== --- src/target/interface/olimex-jtag-tiny-a.cfg (Revision 1438) +++ src/target/interface/olimex-jtag-tiny-a.cfg (Arbeitskopie) @@ -1,5 +1,11 @@ -# REFERENCE: http://www.olimex.com/dev/arm-usb-tiny.html +# +# Olimex ARM-USB-TINY +# +# http://www.olimex.com/dev/arm-usb-tiny.html +# + interface ft2232 ft2232_device_desc "Olimex OpenOCD JTAG TINY A" ft2232_layout olimex-jtag ft2232_vid_pid 0x15ba 0x0004 + Index: src/target/interface/rlink.cfg =================================================================== --- src/target/interface/rlink.cfg (Revision 1438) +++ src/target/interface/rlink.cfg (Arbeitskopie) @@ -1,3 +1,8 @@ -# rlink interface +# +# Raisonance RLink +# +# http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool~tool__T018:4cn9ziz4bnx6.html +# + interface rlink
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
